Firearms Manufacturer Cited for 60 Safety, Health Violations

OSHA has proposed $255,150 in fines against Sturm Ruger & Co. Inc. for 60 alleged violations of safety and health standards identified during the agency's inspections of the firearms manufacturer's Newport, N.H., plant conducted between November 2008 and May 2009.

"Our inspections identified a large number of mechanical, respirator protection, electrical, lead, fire, explosive, and other hazards that must be effectively and continuously addressed to protect the workers at this plant from potentially deadly or disabling injuries and illnesses now and in the future," said Rosemarie Ohar, OSHA's area director in New Hampshire.

OSHA's Concord, N.H.-area inspectors found that the company failed to guard rotating parts on drill presses and sanding and polishing machines despite its knowledge that employees were exposed to severe or fatal injuries if they came in contact with the rotating parts. As a result, OSHA has issued the company one willful citation with $63,000 in proposed fines. OSHA defines a willful violation as one committed with plain indifference to or intentional disregard for employee safety and health.

Additional safety hazards include the lack of spark detectors or suppression systems to minimize fire and explosion hazards in ventilation systems that collect combustible wood and metal dust; allowing combustible dust to accumulate; unguarded floors and platforms; lack of eyewashes and adequate personal protective equipment; inadequate procedures, equipment, and training to lock out machines' power sources; improper storage of compressed gas cylinders; damaged, improperly used, or ungrounded electrical equipment; additional unguarded machinery; and deficiencies with paint spray booths, confined space rescue, compressed air, forklifts, and the transfer of flammable liquids.


The health inspection identified employees exposed to excess levels of lead dust; inadequate lead monitoring, training, hygiene, cleaning, and disposal methods; inappropriate selection of respirators for lead; improper respirator fit-testing and use; no medical evaluations for employees using respirators; no refitting and retraining for employees who experienced a hearing threshold shift; and unlabeled containers of hazardous chemicals.

These conditions resulted in the issuance of 55 serious citations with $188,550 in fines. OSHA issues serious citations when death or serious physical harm is likely to result from hazards about which the employer knew or should have known.

The company also has been fined $3,600 and issued four other-than-serious citations for inadequate recordkeeping. It has 15 business days from receipt of the citations and proposed penalties to comply, request an informal conference with the area director, or contest them before the independent Occupational Safety and Health Review Commission.


Share this Page


Comments

Add your Comment

Your Name:(optional)
Your Email:(optional)
Your Location:(optional)
Comment:
Please type the letters/numbers you see above

Follow Us

OH&S is on Twitter.

Join OH&S Magazine on SafetyCommunity!
Join us on SafetyCommunity!

Upcoming Webinars

2/29: GHS will happen…are you ready?
We invite you to attend this webinar to see how GHS is being used today in several workplaces to enhance worker comprehension and safety.

3/14: 10 Webinar Best Practices. Step-by-step guide to executing a winning webinar
By attending this webinar about webinars, you will learn the what, why and how’s of this exciting, collaborative marketing tool.

Spotlight

For February, OH&S puts the spotlight on:

Poll

OSHA Region 6 Administrator John Hermanson says the agency assessed the maximum statutory fines, a total of $21,500 for four alleged serious violations, against a small Oklahoma grain company in connection with amputation injuries suffered by two teenage workers. Does this case demonstrate the need to increase the amounts OSHA can issue in penalties?