Head & Face Protection


Contractor Fined $162,000 after Worker Dies from Overexposure to Methylene Chloride

Stockbridge, Ga.-based Creative Multicare Inc. was issued five serious, two willful, and one other-than-serious violation following the death of a worker who was exposed to excessive amounts of methylene chloride while using the chemical to remove paint from a bathtub surface.

Lower Leg Submersion Viable for Cooling Suited Responders

A study in the August issue of JOEH found this method increased volunteers' work tolerance by 24 percent over forearm submersion.

A house in Snow Hill, N.C. lay in ruins after a tornado April 16. (Photo: David Fine/FEMA)

After the Tornadoes

The safety training you do today has a very long lifespan.

This ballistic body armor is Galls by Point Blank SE Body Armor Threat Level IIIA.

Workshops Announced on Helmet, Body Armor Standards

The standards that are being revised cover two types of protective equipment for law enforcement.

Three N.Y. Contractors Fined $116,312 Following Fatal Wall Collapse

OSHA's investigation found that at the time of the incident, employees were filling an 18-foot-high by 65-foot-long concrete block wall with cement when the wall collapsed, killing one employee and hospitalizing three others.

$243,360 in Fines Issued to Maine Contractor for Fall Hazards

OSHA inspectors found four Lessard employees exposed to potentially life-threatening falls of 23 feet while working without fall protection on a steep-pitched roof at a work site in Lewiston, Maine.

New NIOSH Fact Sheet Highlights Trenching Safety

From 2000−2009, 350 workers died in trenching or excavation cave-ins—an av¬erage of 35 fatalities per year.

Donning, Doffing Decision Still Debated

A trade association and the U.S. Labor Department offered very different interpretations of the U.S. Supreme Court's 2005 decision in IBP, Inc. v. Alvarez when they commented on its application to FSIS inspectors.



Low Rate of Lung Function Decline in World Trade Center Responders: Study

Decreased lung function was more likely for officers with respiratory symptoms, those who were present when the towers collapsed, and those who worked long hours at the WTC site.

The primary sources of information when determining the components likely to be in the fume are the MSDS and/or the technical data sheet from the manufacturer of the consumable electrode/wire.

Welding Fume and Gas Exposure

Welding fume exposure tends to be highly variable due to several exposure factors.

Six New Jersey Construction Firms Fined $95,470 for Fall, Repeat Violations

The serious violations address fall hazards at heights ranging from 12 to 40 feet, including a lack of guard rails, hand rails, harnesses, and/or belts/lanyards.

Molten Metal Hazards Carry $178,500 in Fines for Foundry

OSHA has cited Multi-Cast Corp. for 13 safety and health violations, including failing to ensure foundry employees wore fire-retardant clothing and protective equipment while working with molten metal.

The standard was revised because NHTSA became concerned when injuries and fatalities among motorcyclists increased for 11 consecutive years.

NHTSA Updates Motorcyclists' Helmet Rule

The new certification label will bear the manufacturer's name and helmet model and the words "DOT FMVSS No. 218 Certified."

Repeat, Fall Hazards Add Up to $125,818 Fine for Aluminum Finishing Firm

This company has disregarded the safety of its employees and repeatedly allowed them to be exposed to struck-by hazards from structural failure, electrocution hazards and falls," said Robert Vazzi, OSHA's area director in Savannah.

DOJ Developing Protective Helmet Standard

It may cover both ballistic and riot protection, according to the published request for committee members from certification bodies and testing labs.

Trench Collapse Leads to $63,360 Fine for Ohio Company

An OSHA inspector was performing a work site inspection when he directed an employee to exit the trench, believing collapse was imminent. Within five minutes the trench collapsed and could have buried the worker under 6 to 7 feet of soil.

Leather Finisher Fined $105,300 Following Worker's Hand Injury

"This case is a stark example of the devastating consequences to workers when adequate machine guarding is absent," said Edward Jerome, OSHA's area director in Albany.

FDA Clears Single-Use Antibacterial N95 Surgical Respirator

The Food and Drug Administration cleared the SpectraShield 9500 N95 surgical respirator, a device that kills 99.99 percent of three different kinds of bacteria when exposed to its outer surface. The single-use, N95 surgical respirator is designed for use in health care settings by health care personnel to protect against microorganisms, body fluids, and particulate material.

Propane Tank Firm Cited Following Forklift Fatality

OSHA cited the company for 19 safety violations following the October 2010 death of a worker who was ejected and crushed after the forklift he was operating overturned.

Trenching Hazards Pile Up $115,000 in Penalties for Ala. Contractor

"A trench can become a grave in seconds. Disregarding workers' safety by leaving them unprotected from potential cave-in and struck-by hazards is unacceptable and will not be tolerated," said Roberto Sanchez, OSHA's area director in Birmingham.

Featured

Artificial Intelligence