$487,700 in Fines Issued to Machine Manufacturer for Repeat, Health Violations

OSHA issued 16 repeat and 17 serious citations that cover such violations as allowing the air pressure to exceed more than 30 pounds per square inch for cleaning equipment and failing to unblock exit doors and routes.

OSHA has issued 33 citations to the Parker Hannifin Corp. plant in Batesville, Miss., alleging numerous safety and health violations as the result of an inspection that began in November 2010. Proposed penalties total $487,700. Cleveland-based Parker Hannifin has 170 facilities throughout the U.S. and manufactures machinery for hydraulics, air conditioning, refrigeration, and aerospace systems.

OSHA issued 16 repeat citations with $407,000 in fines. Fifteen are safety-related and cover such violations as allowing the air pressure to exceed more than 30 pounds per square inch for cleaning equipment, failing to conduct periodic inspections of the lockout/tagout process in place to prevent accidental energy start-up, failing to train workers on lockout/tagout procedures, failing to unblock exit doors and routes, failing to provide machine guarding, and failing to correct electrical deficiencies. One health-related violation was cited for failing to attach hazardous warning labels to five dipping tanks that contained hazardous substances such as potassium hydroxide and isoparaffinic hydrocarbon. The repeat violations are based on previous inspections conducted at other company locations, including a facility in Olive Branch, Miss.

OSHA issued 17 serious citations with $80,700 in fines. Fifteen are safety-related and include such violations as exposing employees to struck-by hazards due to a defective safety latch on a hoist and damaged hooks on an overhead crane; allowing unapproved electrical equipment to be used in a hazardous location where flammable chemicals were present; failing to remove and replace spiral stairs with a conventional stairways; failing to post signage indicating the direction of travel to the nearest exit; failing to provide a danger permit-required confined space sign; failing to mark a web sling with the rated load capacity; and failing to require workers to wear goggles or suitable eye protection while welding. Two health-related citations cover failing to establish an effective hearing program and to provide personal protective equipment.

"Companies that cut corners at the expense of worker safety must be held accountable," said OSHA Assistant Secretary Dr. David Michaels. "In this case, Parker Hannifin not only failed to make safety its top priority, but the company ignored many violations that OSHA previously had brought to its attention."

comments powered by Disqus

OH&S Digital Edition

  • OHS Magazine Digital Edition - June 2019

    June 2019

    Featuring:

    • ASSP SAFETY 2019 PREVIEW
      New Orleans Networking
    • NATION SAFETY MONTH
      Heed These Summer Safety Tips
    • TRAINING
      Education, Skill Development, and Behavior Change
    • SAFETY MANAGEMENT
      What Good Looks Like
    View This Issue