CSB Video Highlights Gas Release Hazards

Entitled “Deadly Practices,” the video includes animations that show the hazards of releasing gas into areas where it can accumulate, ignite, and kill or injure workers or members of the public.

The U.S. Chemical Safety Board (CSB) recently released a new safety video depicting two major accidents caused by the intentional release of flammable fuel gas near work areas, one year after the Kleen Energy explosion. The 15-minute video focuses on two accidents investigated by CSB. A June 9, 2009, explosion at the ConAgra Slim Jim plant near Garner, N.C., that fatally injured four workers and injured 67 others; and a Feb. 7, 2010, explosion at the Kleen Energy natural gas-powered electric generating plant under construction in Middletown, Conn., that killed six workers and injured at least 50 others.

Entitled “Deadly Practices,” the video includes animations that show the hazards of releasing gas into areas where it can accumulate, ignite, and kill or injure workers or members of the public. The video is available online at www.CSB.gov and on CSB’s YouTube channel.

In the video, CSB Chairperson Rafael Moure-Eraso says, “The deadly accidents at Kleen Energy and ConAgra were entirely preventable. At the Chemical Safety Board, it is our hope that standards will be put in place that will require these safer practices, which we believe will save lives.”

The two incidents involved the intentional release of flammable natural gas into work areas, putting workers and nearby communities at risk of fires and explosions. At the Kleen Energy facility workers were conducting a "gas blow," a procedure that forced natural gas at high volume and pressure through newly installed piping to remove debris. The gas was vented to the atmosphere, where it accumulated, came in contact with an ignition source and exploded. At the ConAgra facility workers were purging a pipe feeding gas to an industrial heater. During the purging operation, gas was allowed to flow through the pipe and exit through an open valve inside the utility room where the water heater was located. Flammable gas accumulated inside the building and eventually found an ignition source.

In September 2010 the governor of Connecticut issued an executive order banning the use of natural gas blows during power plant construction in the state. The National Fire Protection Association (NFPA) and the International Code Council (ICC) are taking action to ban the use of natural gas for cleaning and purging pipes.

comments powered by Disqus

OH&S Digital Edition

  • OHS Magazine Digital Edition - June 2019

    June 2019

    Featuring:

    • ASSP SAFETY 2019 PREVIEW
      New Orleans Networking
    • NATION SAFETY MONTH
      Heed These Summer Safety Tips
    • TRAINING
      Education, Skill Development, and Behavior Change
    • SAFETY MANAGEMENT
      What Good Looks Like
    View This Issue