Fatigued Workers Led to Cause of 2011 Train Collision in Iowa, NTSB Says

In April 2011, BNSF coal train collided with the rear end of a standing BNSF maintenance-of-way equipment train near Red Oak, Iowa. Both crewmembers had fallen asleep, which led to their failure to comply with the signal indication requiring them to operate at a restricted speed and stop short of the standing train.

The National Transportation Safety Board (NTSB) has determined that the probable cause of a rear-end collision between two BNSF Railway trains was the striking train crew's fatigue. Both crewmembers had fallen asleep, which led to their failure to comply with the signal indication requiring them to operate at a restricted speed and stop short of the standing train.

On April 17, 2011, an eastbound BNSF coal train collided with the rear end of a standing BNSF maintenance-of-way equipment train near Red Oak, Iowa. The accident occurred at milepost 448.3 on the number two track on the Creston subdivision of the BNSF Nebraska Division. The collision resulted in the derailment of two locomotives and 12 cars. Both the engineer and conductor in the lead locomotive of the coal train were fatally injured.

"Once again, this investigation draws attention to the dangers of human fatigue," said NTSB Chairman Deborah A. P. Hersman. "The human body is not designed to work irregular schedules, especially during the circadian trough, when our bodies are at their lowest alertness."

Contributing to the accident was the absence of a positive train control system that identifies the rear of a train and stops a following train if a safe braking profile is exceeded.

"Humans are fallible and make mistakes and operational accidents can be prevented with positive train control," Hersman said.

Also contributing to the severity of collision damage to the locomotive cab of the striking coal train was the absence of crashworthiness standards for modular locomotive crew cabs.

As a result of this accident investigation, NTSB made safety recommendations to the Federal Railroad Administration, the Association of American Railroads, and the BNSF Railway.

The safety issues addressed by the recommendations include: train crew fatigue, BNSF Railway fatigue awareness training, positive train control regulations, design and crashworthiness of modular locomotive cabs, and survivability of electronic data.

For more information, click here.

Download Center

  • EHS Buyer's Guide

    Download this buyer's guide to make more informed decisions as you're looking for an EHS management software system for your organization.

  • Online Safety Training Buyer's Guide

    Use this handy buyer's guide to learn the basics of selecting online safety training and how to use it at your workplace.

  • COVID Return-to-Work Checklist, Fall 2021

    Use this checklist as an aid to help your organization return to work during the COVID-19 pandemic in a safe and healthy manner.

  • SDS Buyer's Guide

    Learn to make informed decisions while searching for SDS Management Software.

  • Risk Matrix Guide

    Risk matrices come in many different shapes and sizes. Understanding the components of a risk matrix will allow you and your organization to manage risk effectively.

  • Industry Safe

Featured Whitepapers

OH&S Digital Edition

  • OHS Magazine Digital Edition - September 2021

    September 2021

    Featuring:

    • COMBUSTIBLE DUST
      Managing Combustible Dust and Risk Mitigation
    • PPE: CONSTRUCTION
      The Rising Popularity of Safety Helmets on the Jobsite
    • PPE: ELECTRICAL SAFETY
      Five Tips for a Successful Wear Trial
    • SAFETY & HEALTH
      Medical Surveillance Versus Medical Screening
    View This Issue