Failing to perform the duties of a driver involved in a motor vehicle crash can result in felony charges, the Oregon Department of Transportation warns.
The 2017/18 Lake Oroville Winter Operations Plan says the main spillway is to be used if the reservoir's elevation reaches 830 feet during the month of April. Current forecasts show inflows may raise the reservoir to near the 830-foot trigger elevation by the middle of next week. On April 3, the elevation was 794 feet.
NATS announced that, working with Leidos and Heathrow Airport, it has launched the world's first fully systemized Optimized Runway Delivery tool. It will improve punctuality at the UK's busiest airport.
CPSC reported that between December 2013 and July 2016, Polaris received 36 reports of fires associated with its model year 2014 Rangers and made two design changes to the vehicle to prevent the heat shield from becoming loose and falling off.
Because the damage caused by chemical fertilizers is often long-term and cumulative, it may be wiser to consider alternative and sustainable methods of fertilizing the soil.
Workers are speaking loud and clear—with increased cut risks abundant in today’s machinery-heavy workspaces, cut protection can be as critical a factor as chemical protection.
In the next five years, we'll see sustainability in commercial projects moving from a luxury to a requirement. Examining your product and its performance now will put you ahead of the curve.
Good shoes make better employees.
Looking at most "world class" health and safety organizations, technology plays a vital role in their success. They view software as one of many tools, not the sole solution.
Employers must evaluate their first aid response and preparedness programs based not only on OSHA compliance, but the needs of their workplace and employees.
Test results demonstrate that an employee is indeed safer while wearing a pair of safety-toed shoes.
While hands may be protected with gloves, arms without proper protection are vulnerable to cuts, abrasions, and burns.
Hot work should not be done where flammable vapors or combustible materials exist. Both the work and the equipment being used by the welder should be placed outside any hazardous area.
This year's Trends Study said the largest number of net increases reported by respondents was for including wellness components in their programs.
A Job Hazard Analysis is the most critical part of the job—this gives us an opportunity to go in the field with operations and review, recognize, and control hazards at the job site or in the area.
Is your plant prepared for pressurized flammable liquids and pressurized gas fires?
Just because a poison or inhibitor wasn't applied directly to the instrument doesn’t mean that it may not have been exposed to something while in a tool box, storage locker, or anywhere else gas detection equipment may be stored.