New Report Focuses on Smoke Alarm Effectiveness

The death rate per 100 reported fires was twice as high in homes without a working smoke alarm as it was in home fires with smoke alarm protection.

In 2005-2009, roughly two-thirds of home fire deaths resulted from fires in properties without working smoke alarms, according to the report “Smoke Alarms in U.S. Home Fires,” released by the National Fire Protection Association (NFPA). The report examines the number of reported fires in U.S. households with and without working smoke alarms, as well as the effectiveness of smoke alarms in preventing fire-related deaths.

“Working smoke alarms are essential in saving lives from fire,” said Lorraine Carli, vice president of communications for NFPA. “We know you can have as little as three minutes to get out if you have a fire before it becomes deadly. The early warning provided by smoke alarms gives you extra time to escape.”

Key findings from the report include:

  • The death rate per 100 reported fires was twice as high in homes without a working smoke alarm as it was in home fires with smoke alarm protection.
  • Out of all home fire deaths, 38 percent resulted from fires in which no smoke alarms were present.
  • Hardwired smoke alarms are more reliable than those powered solely by batteries.
  • Many homes do not have the protection recommended in recent editions of NFPA 72®, National Fire Alarm and Signaling Code, which requires interconnected smoke alarms in every bedroom, outside each sleeping area, and on every level of the home.

NFPA recommendations:

  • Install smoke alarms inside every bedroom, outside each sleeping area, and on every level of the home, including the basement.
  • For the best protection, interconnect all smoke alarms so when one sounds they all sound.
  • Use both photoelectric and ionization smoke alarms or combination ionization and photoelectric alarms, also known as dual sensor alarms. An ionization smoke alarm is generally more responsive to flaming fires and a photoelectric smoke alarm is generally more responsive to smoldering fires.
  • Replace all smoke alarms every 10 years or sooner if they do not respond properly when tested.
  • Test all smoke alarms at least once a month by using the test button.

Download Center

HTML - No Current Item Deck
  • EHS Management Software Buyer's Guide

    Download this buyer's guide to make more informed decisions as you're looking for an EHS management software system for your organization.

  • Steps to Conduct a JSA

    We've put together a comprehensive step-by-step guide to help you perform a job safety analysis (JSA), which includes a pre-built, JSA checklist and template, steps of a JSA, list of potential job hazards, and an overview of hazard control hierarchy.

  • Levels of a Risk Matrix

    Risk matrices come in many different shapes and sizes. Understanding the components of a risk matrix will allow you and your organization to manage risk effectively.

  • Free Safety Management Software Demo

    IndustrySafe Safety Management Software helps organizations to improve safety by providing a comprehensive toolset of software modules to help businesses identify trouble spots; reduce claims, lost days, OSHA fines; and more.

  • Industry Safe
Bulwark FR Quiz

OH&S Digital Edition

  • OHS Magazine Digital Edition - March 2021

    March 2021

    Featuring:

    • EMPLOYEE TESTING
      The Impact of COVID-19 on Drug Testing
    • PROTECTIVE APPAREL
      Preparing for Unpredictable Spring Weather
    • FALL PROTECTION
      Building a Comprehensive Floor Safety Strategy
    • GAS DETECTION
      Gas Hazards and the COVID-19 Vaccine
    View This Issue