2 Employers Cited After Workers Found with Elevated Levels of Arsenic, OSHA Says

2 Employers Cited After Workers Found with Elevated Levels of Arsenic, OSHA Says

One employer faces about $124,780 in proposed penalties while the other faces $53,574.

Two employers are facing citations and proposed penalties after workers were found to have “elevated levels of arsenic.”

According to a news release, OSHA received a referral from the Georgia Poison Center after screening tests revealed the workers’ elevated levels. The agency inspected Arch Wood Protection Inc and the maintenance contractor at the site, Mullins Mechanical & Welding LLC of Carrollton, both of which were working at a site in Conley, Georgia, about 10 miles south of Atlanta.

It was found that a worker's exposure to arsenic was “approximately 20 times above the permissible exposure limit” while drum dumping, according to the citation. A worker's—the citation does not specify if it was the same worker or a different one—exposure was also about 3.8 times higher than the limit when performing the same activity. The employer also did not give respirators to workers going into the area where the drum dumping was occurring, the citations allege.

Per OSHA, Arch Wood Protection was cited for:

  • “Allowing hazardous inorganic dust to accumulate on desks, food packaging, lockers, refrigerators and the inner surfaces of workers’ respirators.
  • Not requiring employees using respirators to remove facial hair that might prevent a proper fit and seal.
  • Allowing workers to enter regulated areas without a respirator.
  • Not requiring contractors to change clothing and decontaminate properly at the end of their shifts.
  • Allowing pallets of materials to block emergency eyewash and shower stations.
  • Not providing adequate eye protection for workers handling inorganic arsenic acid samples.”

In total, OSHA cited Arch Wood Protection for nine violations. The employer—which also faces $124,780 in proposed penalties—contested the findings.

Mullins Mechanical & Welding was cited for not using “adequate work practice controls” and not making sure certain workers showered when they finished working, among other violations, and faces proposed penalties of $53,574, per the citation.

About the Author

Alex Saurman is a former Content Editor for Occupational Health & Safety,who has since joined OH&S’s client services team. She continues to work closely with OH&S’s editorial team and contributes to the magazine.

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence