Top Features


This U.S. Coast Guard photo included in the NTSB report shows damage to the port bow of barge B. No. 255 after the explosion.

NTSB Cites Lack of Maintenance, Safety Management in Barge Explosion

The October 2017 explosion and fire involving the tug and barge Buster Bouchard/B. No. 255 off Port Aransas, Texas, killed two crewmen and caused $5 million in property damage.

DOT Forming Lithium Battery Advisory Committee

The panel is a statutorily mandated advisory committee intended to facilitate communication among manufacturers of lithium ion and lithium metal cells and batteries, manufacturers of products containing them, air carriers, and the federal government about the safe transportation of lithium ion and lithium metal cells and batteries.

A company that solely tracks lagging KPIs and has low incident rates, while positive, leaves the organization with very little data to analyze and help predict future decisions.

AGC Backs Funding for Technical Training

"With overall unemployment now at the lowest level in nearly 50 years, contractors are having an ever harder time finding workers with or without construction experience," said Ken Simonson, AGC's chief economist. "Average pay in construction is more than 10 percent higher than in the private sector as a whole, but job openings in the industry keep climbing."



Expert Panel to Issue Safety Recommendations for Autonomous Vehicles

"Autonomous vehicles and burgeoning safety technologies hold tremendous potential for saving lives on our roads, but public understanding of what these vehicles are – and aren't – capable of is paramount toward achieving these benefits," said Jonathan Adkins, GHSA's executive director.

Canada to Require TIH Railcars Be Made of Normalized Steel

The head and shell of tank cars transporting Toxic Inhalation Hazard substances will be required to be made of normalized steel, with the requirement taking effect on July 2, 2021.

Scaffolding, Roofs, Ladders, and More: 6th Annual Stand-Down Almost Here

CPWR has posted many resources on its Stand-Down website, including a five-day plan for getting workers to focus on falls during the week. Among the suggestions the organization makes are to use CPWR-NIOSH infographics, CPRW fatality maps, and NIOSH and state Fatality Assessment and Control Evaluation reports to focus workers' attention on identifying fall hazards.

Community Risk Reduction is defined in NFPA 1035 as "programs, actions, and services used by a community, which prevent or mitigate the loss of life, property, and resources associated with life safety, fire, and other disasters within a community."

Maryland's Governor Signs Two Firefighters Benefits Bills

House Bill 595 adds bladder and kidney, or renal cell cancers to the types of cancers considered as occupational diseases for firefighters under the workers' compensation law. The other bill will expand workers' compensation coverage by closing loopholes regarding cumulative time served.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

Chemical Management: Five Ways to Meet the Challenges of IH in a Changing Industry

The most robust software solutions feature ingredient indexing to help you track chemical ingredients across products while flagging those that are subject to more stringent regulatory standards.

One of the easiest ways to monitor safety metrics is by using a safety management software. As you improve your safety performance analysis, you’ll need a system that can handle the influx of data, give you access to real-time metrics, and help you glean valuable insights hidden within the flood of information.

How to Conduct a Safety Inspection Remotely

Remote inspections can be an alternate and effective way to conduct a safety inspection.

Test manikin before exposure, dressed in non-inherent shirt and inherent pants. (DuPont Protection Solutions photo)

New Considerations for Selecting Flame-Resistant Workwear

In a real-world fire emergency, chances are that workers will need to flee to safety, so it is critical that FR workwear continue to provide coverage and allow mobility to protect workers after a flash fire or arc flash.

The last thing first responders need is a false pass on their respiratory protection fit. (OHD, LLLP photo)

Why Respiratory Protection and Fit Testing Matter

I cannot stress enough how important it is for all first responders to always wear respiratory protection on the fireground—even after the fire is out.

Excessively hot or cold water temperatures in safety showers and eyewashes can exacerbate the very injuries the safety equipment is designed to reduce. (Haws Corporation photo)

Best Practices When Procuring, Placing and Maintaining Your Emergency Eye/Face Wash and Showers

It is critical to ensure that the equipment is functioning properly and highly visible in case of an emergency.

A written respiratory protection program must be implemented that meets all of the requirements of 29 CFR 1910.134. (3M Personal Safety Division photo)

Why Pick a PAPR?

PAPRs are useful and often necessary in many types of hazardous jobs and conditions.

This CSB photo shows the aftermath of the Imperial Sugar plant explosions in 2008 and is found in the U.S. Chemical Safety and Hazard Investigation Board

Towards Compliance: NFPA 652 Standard on the Fundamentals of Combustible Dust

If explosion preventive measures alone cannot reduce the risk of a dust cloud explosion to an acceptable level, then explosion protection measures must be considered.

The primary causes of heat stress are poor hydration, lack of shade, and lack of rest breaks, not clothing. (Tyndale Company photo)

The Truth About Heat Stress and FRC

It would be a terrible shame to put American workers at risk of catastrophic or fatal burn injury because of an outdated myth about PPE and heat stress.

Stress in the World of Industrial Hygiene: Is It Understood?

How does stress affect an employee's health to the point that we need to take it into consideration when evaluating their working environment? Should stress be included in the evaluation to management as a matter of concern?

Fire Safety: Plan, Prevent, Train, Recover

Fires have the highest casualty rate of workplace accidents, but there are ways to mitigate risk.

Featured

Artificial Intelligence