March is National Ladder Safety Month: Here’s What You Should Know

March is National Ladder Safety Month: Here’s What You Should Know

Understanding ways to stay compliant and safe on a ladder is crucial to the safety of the employees using them.

Ladders can be a very helpful tool on construction sites, but if not used properly, they can become very dangerous. This is proven by OSHA’s Top 10 Most Frequently Cited Standards list where Ladders, Construction (29 CFR 1926.1053) has sitting at number six for many years now.

Understanding ways to stay compliant and safe on a ladder is crucial to the safety of the employees using them. In order to bulk up education and awareness for ladder safety as well as decrease the amount of injuries and fatalities related to ladders, March has been named National Ladder Safety Month.

Here are some specific requirements designed to ensure worker safety in the OSHA Standard for Ladders:

Loads

Self-supporting (foldout) and non-self-supporting (leaning) ladders must be able to support at least four times the maximum intended load. Exceptions are extra-heavy-duty metal or plastic ladders, which must be able to sustain 3.3 times the maximum intended load.

Angle

Non-self-supporting ladders, which are meant to lean against other support, are to be positioned at an angle that the horizontal distance from the top support to the foot of the ladder is about a fourth of the working length of the ladder.

Rungs

Ladder rungs, cleats, or steps must be parallel, level and uniformly spaced when the ladder is in position for use. Rungs should be spaced between 10 and 14 inches apart. Rungs must also be shared that an employee’s foot cannot slide off, and must be skid-resistant.

Slipping

Ladders are to be kept free of oil, grease, wet paint and other slipping hazards. For ladders made from wood materials, the ladder must not be coated with an opaque covering, except identification or warning labels on one face only of a side rail.

Other Relevant Requirements

  • Foldout or stepladders must have a metal spreader or locking device to hold the front and back sections in an open position when in use.
  • When two or more ladders are used to reach a work area, they must be offset with a landing or platform between the ladders.
  • The area around the top and bottom of ladder must be kept clear.
  • Ladders must not be tied or fastened together to provide longer sections, unless they are specifically designed for such use. 
  • Never use a ladder for any purpose other than the one for which it was designed.

For more information on National Ladder Safety Month, visit laddersafetymonth.com.

Download Center

  • Safety Metrics Guide

    Is your company leveraging its safety data and analytics to maintain a safe workplace? With so much data available, where do you start? This downloadable guide will give you insight on helpful key performance indicators (KPIs) you should track for your safety program.

  • Job Hazard Analysis Guide

    This guide includes details on how to conduct a thorough Job Hazard Analysis, and it's based directly on an OSHA publication for conducting JHAs. Learn how to identify potential hazards associated with each task of a job and set controls to mitigate hazard risks.

  • A Guide to Practicing “New Safety”

    Learn from safety professionals from around the world as they share their perspectives on various “new views” of safety, including Safety Differently, Safety-II, No Safety, Human and Organizational Performance (HOP), Resilience Engineering, and more in this helpful guide.

  • Lone Worker Safety Guide

    As organizations digitalize and remote operations become more commonplace, the number of lone workers is on the rise. These employees are at increased risk for unaddressed workplace accidents or emergencies. This guide was created to help employers better understand common lone worker risks and solutions for lone worker risk mitigation and incident prevention.

  • EHS Software Buyer's Guide

    Learn the keys to staying organized, staying sharp, and staying one step ahead on all things safety. This buyer’s guide is designed for you to use in your search for the safety management solution that best suits your company’s needs.

  • Vector Solutions

Featured Whitepaper

OH&S Digital Edition

  • OHS Magazine Digital Edition - June 2022

    June 2022

    Featuring:

    • SAFETY CULTURE
      Corporate Safety Culture Is Workplace Culture
    • HEAT STRESS
      Keeping Workers Safe from Heat-Related Illnesses & Injuries
    • EMPLOYEE HEALTH SCREENING
      Should Employers Consider Oral Fluid Drug Testing?
    • PPE FOR WOMEN
      Addressing Physical Differences
    View This Issue