Top Features


Winter Weather Driving: Safety Tips to Prepare, Protect, and Prevent

Winter Weather Driving: Safety Tips to Prepare, Protect, and Prevent

Winter is here, and many regions will be experiencing ice and snow on the roads.

Several railroad grade crossings will get flashing lights and gates as a result of nearly $10 million from the Railroad Safety Grants for the Safe Transportation of Energy Products (STEP) by Rail Program.

FRA Delays System Safety Rule Another Year

The rule would require commuter and intercity passenger railroads to implement a system safety program. FRA's Nov. 30 notice says rail labor organizations filed a single joint petition seeking a delay, and state and local transportation departments and authorities filed three other petitions.

The revised HCS standard spells out how to maintain a written HazCom program, how to properly label containers of chemicals and chemical containers that will be shipped to other workplaces, and employee training programs.

What the Standards Require

Both 1910.1200 and 1910.120 are critical to those working with hazardous chemicals and to their supervisors.



In terms of both materials and ergonomics, frame quality is of critical importance when choosing safety eyewear. (Bollé Safety photo)

The Economics of Safety Eyewear

Eyewear that is uncomfortable or structurally compromised simply doesn't get worn.

It is worth noting that the process of de-energizing a system is energized work. Until the absence of voltage is verified, any work done is still considered energized and, therefore, requires appropriate hazard protections, such as arc-rated PPE. (Westex by Milliken photo)

Four Parties Affected by NFPA 70E Updates in 2018

The updated NFPA 70E can be explored through the lens of parties impacted. Through analyzing party responsibility, safety engineers and managers can make informed decisions to comply.

Training programs always must focus on why it is never acceptable to take shortcuts and "work around" safety codes to complete a job more quickly. (Molex, LLC photo)

Utilizing Proper Technologies Key to Ensuring Electrical Safety

Adequate training, protection from exposure, and disciplined use of ground fault circuit interrupters are integral to keeping workers safe.

Most Emergency Response Plans read well on paper but have gaps that typically come to light only when a plant-wide drill is conducted to test the plan.

The Value of Realistically Testing Your ERP

Warning! This is a test. This is a test of the Emergency Response Plan.

Portable Gas Detection

Safety should always be of the highest priority—it is the reason these detectors were invented, after all.

A well-run program is the best way to help ensure that your welders are protected from respiratory hazards. (3M photo)

Tips for Dealing with Respiratory Hazards in Welding

After identifying the hazards, the exposure levels from the exposure assessment must be compared to the permissible exposure limit, as set by OSHA, to determine whether respiratory protection is needed.

We congratulate the 22 winners in our tenth annual contest recognizing the most innovative new safety products.

2017 NPOY Contest Winners Honored

We congratulate the 23 winners in our ninth annual contest recognizing the most innovative new safety products.

To fight any fire effectively, the person operating the extinguisher must be able to move around easily and safely while holding the extinguisher. (Johnson Controls photo)

Get the Facts About Fire Extinguisher Selection

In tough, high-hazard environments, fire extinguishers are put to the test.

The 2016 standard was written to be scalable to meet the needs of both large and small companies with varying levels of technology present in their machinery and processes.

Controlling Hazardous Energy with Lockout/Tagout—Common Challenges and Best Practices

We have found that only about 10 percent of companies run effective lockout programs. In fact, we have observed that up to three-out-of-ten employers have no lockout program at all.

The safety manager can instantly see, via his or her own smartphone, tablet, laptop, etc., which worker is using which detector. (Honeywell Industrial Safety photo)

Connect Workers and Technology for Safer, More Efficient Work Sites

Acquiring the latest software for safety management and monitoring can make a significant difference. The key is connected technology.

Fourteen Appointed to HHS Tick-Borne Disease Working Group

HHS reports that Lyme disease accounts for the majority of tick-borne disease in the United States, and CDC estimates more than 300,000 people are diagnosed with Lyme disease annually, but only about 30,000 of those cases are reported to local and state health departments and to CDC.

2018 NFPA Fire Code Has Been Released

NFPA 1-2018 contains a new chapter on marijuana growing, processing or extraction facilities and another new chapter on cleaning and purging of flammable gas piping systems.

This NASA photo shows the mark left on a window of the International Space Station’s Cupola by a micro meteor orbital debris strike. The Space Debris Sensor will measure the orbital debris environment for two to three years, according to NASA.

Debris Sensor Among Research Projects Set for Space Station Delivery

One investigation being delivered in the next resupply mission will help researchers understand how to prevent muscle breakdown in the absence of gravity.

The more significant issue is workers removing gloves at critical points throughout the workday, and that behavior can be tied to habit. (Ansell photo)

Redefining Comfort: The Key to Understanding Non-Compliance

If we are going to truly redefine the comfort zone of today's worker, it will require technological advances to gloves along with improved education around safety practices and a far more thoughtful, proactive approach to changing behavior and breaking counterproductive habits.

Featured

Artificial Intelligence