Top Features


ISEA Seeks Public Comments on Proposed Industry Standard for Impact Resistant Gloves

ISEA Seeks Public Comments on Proposed Standard for Impact-Resistant Gloves

The standard, currently designated ISEA 138, would establish minimum requirements for performance, classification, and labeling in hand protection products designed to protect the knuckles and fingers from impact forces while performing tasks at work.

About 5,000 Vehicles Pulled from Service During Brake Safety Week

Enforcement personnel throughout Canada and the United States inspected commercial motor vehicles for brake violations. During the week, they placed 4,955 vehicles out of service until critical problems with their brakes could be fixed.

Wrong Equipment Cited in Drowning Investigation

The Transportation Safety Board of Canada's investigation found that the third officer used a rope ladder to read the seaward draft marks in the middle of the vessel. When resting flat against the vessel's hull, this ladder leaves little room for hand and foot holds, making it unsuitable for this task, and the rope ladder was rigged to the guardrail in such a way that there was no safe way to access the ladder from the deck.



DEA Releases 2018 Drug Threat Assessment

The Drug Enforcement Administration's acting administrator, Uttam Dhillon, said the report underscores the magnitude of the nation's opioid crisis. "This report highlights the necessity of using all the tools at our disposal to fight this epidemic," he said.

A Half Million Work Injuries in UK During 2017/2018: HSE

There have been no significant changes in the industries in which workers are most likely to be injured by their work, with construction and agriculture among the sectors with the highest risks.

2018 DuPont Kevlar® Innovation Awards

SPONSORED

2018 DuPont™ Kevlar® Innovation Awards

For over 50 years, Kevlar® has collaborated with manufacturers to continuously improve the protection, durability, and comfort of protective gloves and sleeves.

Contractor Cited for Willful Violations of Nail Gun Regulations

A carpenter was injured on April 17 at a Lake Forest work site. He was carrying a nail gun in his right hand, with his finger on the trigger, when it discharged, plunging a nail into his left arm.

If a glove increases hand fatigue, it can cause chronic, degenerative conditions such as tendinitis and arthritis. It can lead to dropped objects, wasted inventory, and increased time off for workers. (Ansell photo)

Ergonomics in Industrial Environments: Hand Protection is the New Frontier

On average, about 120,000 people annually undergo surgery to relieve work-related carpal tunnel symptoms. This is a significant expense for employers.

Monitoring and sampling for dusts, gases, vapors, and mists should be a part of any personal exposure assessment initiative and is not only accepted practice, it represents best practice when done correctly. (Casella photo)

Monitoring for Respiratory Hazards—Challenges and Opportunities in the Workplace

Monitoring and sampling for dusts, gases, vapors, and mists should be a part of any personal exposure assessment initiative and is not only accepted practice, it represents best practice when done correctly.

With their old palm coating, workers at a water heater manufacturer were going through three pairs of gloves per day. The new palm coating gave them about three days of wear for each pair of gloves. (Magid photo)

A New Innovation in Glove Coatings

The latest innovations in nitrile-based glove coatings have created a game-changing double-dip that takes the best of traditional palm coatings and rolls them into one unique glove treatment without sacrificing dexterity or tactile sensitivity.

Slippery floors due to the frequent washing process are also a constant concern in health care settings.

Incorporating Floor Safety into Other Routine Inspections

Establishing procedures for routine cleaning in production areas can help to maintain workspaces, storage rooms, and fluid dispensing areas. It also can make annual “spring cleanings” less time consuming.

Solutions for Improving Arc Flash Safety in Health Care

The dangers of arc flash events in health care are amplified by the possibility for downtime resulting from arc flashes. Downtime in the health care environment is simply not acceptable.

Businesses with welding operations and welding contractors need to assess their controls and respiratory programs, increase their awareness of the hazards, and inform safety officers and workers of the appropriate measures for better respiratory prevention. (CleanSpace Technology photo)

Three Trends Impacting the Respiratory Market

New and innovative PAPR products are increasing user acceptance and protecting workers better.

We must remember to always wear our hard hats. If they are sitting at a desk, on a work bench, or in a truck, they are definitely not going to protect us.

Heads Up for Safety

One of the newest consensus standards from the International Safety Equipment Association aims to prevent head injuries and other serious injuries and damage from the impact caused by dropped objects.

Stopping Fatal Falls

Falls figured prominently in OSHA's enforcement actions during August and September 2018.

Recommendations from the U.S. Chemical Safety Board following the Deepwater Horizon blowout and oil spill in the Gulf of Mexico in April 2010 are still open. (U.S. Chemical Safety Board photo)

CSB Adopts Order on Worker Participation in Investigations

The five-page order says investigators-in-charge of any given investigation are to offer a reasonable number of workers and/or their representatives the opportunity to participate in investigative activities.

Introducing Nomex® Comfort, the latest innovative FR PPE fabric offered exclusively by DuPont.

SPONSORED

Introducing Nomex® Comfort, the latest innovative FR PPE fabric offered exclusively by DuPont.

For over 50 years, garments made with Nomex® fibers have been advancing the performance of protective FR PPE.

Featured

Artificial Intelligence

Webinars