Articles


Based on its investigations of combustible dust incidents, the U.S. Chemical Safety Board has concluded that they are entirely preventable. (Photo by Andrew Hancock, Huntington Herald-Press, included in CSB

What You Don't Know About Combustible Dust, But Should

By understanding the risks of this hazard and the regulations surrounding it, you can better equip your facility to prevent "near misses" so they never turn into catastrophic explosions.

A Framework for Hazard Banding

Exposure limits are absent for thousands of chemicals, creating a need for guidance that occupational exposure banding can help to fill, according to the authors of a new guidance document.

The purpose of any fume control system is to help control worker exposure to welding fume. If not maintained properly, the system may not adequately control that exposure. (Lincoln Electric photo)

Clearing the Air: The Importance of Filter Replacement for Welding Fume Extraction Systems

For as much as you might be tempted to cut costs, filter replacement isn't a good place to do it. Not all replacement filters are alike, even if they are specifically designed to fit your system.

CSB Releasing Investigative Report This Week on 2015 Torrance Explosion

Cal/OSHA cited ExxonMobil Refining & Supply Company in August 2015 for safety and health violations following its own investigation of the California refinery explosion, which injured four workers.

Three Groups to Consider in Emergency Communication Plans

Knowing the types of emergencies to expect and what response is expected from each person makes it easier for employees to follow the instructions given by either on-site or external responders.

Measuring Behavioral Integrity of Safety Ownership and Improvement

Where there is no behavioral integrity, trust, relationships, and maturing the culture all suffer. Progress will be at a standstill.

Wholesale adoption of GHS hazard classsification principles will disrupt chemical hazard assessment programs and heighten problems manufacturers and importers will face.

Understanding Chemical Safety Following the Final GHS Deadline

Don't view the conclusion of this round of GHS deadlines as the end of the process, but rather the beginning of the new state of HazCom and what OSHA now expects for compliance.

OSHA Kicks Off Stand-Down in D.C.

The kickoff event will be held May 1 at The Wharf Project, a multi-use redevelopment project under construction on the District of Columbia waterfront. The project is moving toward an October 2017 grand opening.



Expanding Leadership Vision

In my experience in the realms of Safety performance, Magnifying Vision is the most underutilized of the three types of Visioning.

Having a device that does not fit properly will force workers to remove the protection from their ears, thus exposing them to dangerous levels of noise at various points throughout their work shift. (Cotral Lab, Inc. photo)

How to Choose the Most Effective Hearing Protection?

Decision makers must consider that in many cases, workers have to wear hearing protection for eight hours.

Featured

Artificial Intelligence