Top Stories


Can Company Cited for Machine Hazards

Allstate Can Corp. has been fined $104K after workers suffered injuries, including amputations.

FMCSA Declares Trucking Company an Imminent Hazard to Public Safety

An investigation into an accident led to the decision.

HHS Pursuing Tests for Radiation Absorbed in Nuclear Emergencies

ASPR's Biomedical Advanced Research and Development Authority will use authority granted under the Project BioShield Act of 2004 to support the tests' late-stage development and potentially purchase tests from one or more of the companies for the Strategic National Stockpile.



CDC Backs Projects Fighting Antibiotic Resistance

"Understanding the role the microbiome plays in antibiotic-resistant infections is necessary to protect the public's health," said CDC Director Dr. Tom Frieden, M.D., MPH. "We think it is key to innovative approaches to combat antibiotic resistance, protect patients, and improve antibiotic use."

OSHA Proposes to Add Two Additional Fit-Testing Protocols to Respiratory Standard

The protocols would apply to employers in the general, shipyard and construction industries.

Aluminum Company Continues to Expose Employees to Machine Hazards, Says OSHA

Aluminum Shapes LLC has been fined $89K for repeat and serious safety violations.

NTSB Cites Fatigue, Methamphetamine Use in Chattanooga Crash

The board noted that Kentucky is one of only two U.S. jurisdictions that do not provide crash data in their three-year driver license records. Because of this, Cool Runnings Express did not have crash data for this truck driver; he had had four crashes in the previous three years, two of which were CMV crashes, NTSB noted.

DOT and NSC Announce New Partnership to End Roadway Fatalities

The Road to Zero coalition will try to end traffic fatalities within the next 30 years.

Joint Commission Launches Workplace Violence Resource Center

"Many of us in health care have witnessed or experienced workplace violence firsthand," said Ann Scott Blouin, RN, Ph.D., FACHE, executive vice president of Customer Relations for the commission. "It is critical that we share key resources with those in the health care community to help them prepare for and address, as well as hopefully prevent, this type of unfortunate situation from taking place."

OSHA Says Workers Exposed to Hazardous Chemicals, Compressed Gas and Falls at Tire Retailer

Mavis Tire faces $103K in federal fines after an inspection.

OSHA Rolls Out Another Standards Improvement Measure

The agency's announcement said these proposed revisions would save employers an estimated $3.2 million per year and are based on responses to a public Request for Information issued in 2012 and recommendations from the Advisory Committee on Construction Safety and Health, OSHA's staff, and the Office of Management and Budget.

The data NIOSH researchers developed show that firefighters in turnout gear do not fit well in today

Ramp-Up Alert Tones Lower Firefighters' Stress, Study Finds

The researchers found that standard alerting caused a median increase in heart rate of 7 beats per minute, while the ramp-up tones caused a median increase of 5 bpm. Their post-study survey found the firefighters strongly preferred the ramp-up tones.

Pesticide Inspections Database Launched in Canada

Information on inspections of companies that manufacture pest control products are now available to the public online, and Canadians can search the Pest Control Registrant Inspections Database for specific inspection findings, summary report cards from inspections, and information about companies' history of compliance with the Pest Control Products Act.

NYC's Heat Season Under Way

The Department of Housing Preservation and Development imposes a fee of $200 per inspection if it has to perform three or more inspections at the same location within the same heat season for heat violations or calendar year for hot water violations. During the 2015-2016 heat season, it billed for $148,800 in inspection fees.

The American Red Cross installed almost 1,000 smoke alarms in one day in North Carolina homes in early 2015.

Census Webinar to Showcase New Orleans Smoke Alarm Campaign

The Oct. 13 webinar will explain how communities can launch similar projects using free tools and public data. It's taking place during this year's Fire Prevention Week (Oct. 9-15).

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence