Top Stories


Transport Canada to Look at De-Icing Recommendations

The Transportation Safety Board of Canada has recommended that the Department of Transport collaborate with air operators and airport authorities to identify locations in remote northern areas of the country where there is inadequate de-icing and anti-icing equipment and take urgent action to ensure the proper equipment is available.

OSHA Cites Florida Roofing Contractor for Repeated Fall Hazard Exposure

The company has been cited four times in the past five years for similar violations.

U.S. Fatal Work Injury Rate Dropped in 2017

Fatal falls were at their highest level in the 26-year history of the Census of Fatal Occupational Injuries (CFOI) and accounted for 887 workers' deaths. BLS also reported that fatal occupational injuries involving confined spaces rose 15 percent to 166 in 2017 from 144 in 2016.



Agency Warns Dental Patients of Infection Potential

"Even though the risk of infection from this situation is likely to be low, we don't know the exact risk for each patient at this clinic," said Dr. Jeff Duchin, Health Officer for Public Health – Seattle & King County. "Because infections can spread when good infection control practices are not followed, if you've been a patient at the George M. Davis Clinic, talk with your health care provider to help determine if you should get tested."

HELP Chairman Will Not Seek Re-Election in 2020

U.S. Senator Lamar Alexander will not seek re-election to the Senate in 2020, according to a statement he released Dec. 17.

Michigan Lowers Acceptable Blood Lead Levels for Workers

Michigan Lowers Acceptable Blood Lead Levels for Workers

Under the new MIOSHA rules, employees must be removed from lead exposure when their BLL reaches 30 μg/dL and cannot return to work involving lead exposure until their BLL falls below 15 (μg/dL).

NIOSH Develops Tools to Help Identify and Assess Areas of Dampness and Mold

Dampness can promote the growth of mold, bacteria, fungi, and insects. Workers and others in damp buildings can be exposed to airborne pollutants from biological contaminants and the breakdown of building materials.

OSHA Renews Charter of its Maritime Advisory Committee

MACOSH is made up of 15 representative members appointed by the secretary from multiple segments of the maritime industry (such as shipyard, commercial fishing, and longshoring) and representing multiple views and interests, such as management, safety and health professional organizations, and labor.

Oregon OSHA Pesticide Drift Regs Taking Effect Jan. 1

The rules expand a protective zone, extend the evacuation period, require storage for boots and shoes to prevent pesticides from being tracked into workers' housing, and require doors, windows, and air intakes to be closed when pesticides are applied.

Ho, Ho, How to Lower Retail Workers' Stress Levels

NIOSH recommends managers and employees work together to identify critical stress-related problems and design reasonable solutions to address them. And its online resources can help retail employers and workers alike.

NTSB to Unveil New Most Wanted List Jan. 9

NTSB also will host a Twitter Q&A during the event. To participate in the Twitter Q&A and to stay up to date with the Most Wanted List, follow the agency on Twitter at @NTSB and use the hashtag #ntsbmwl.

Toyota Issues Recalls of Almost 134,000 SUVs, Trucks

Toyota is conducting a safety recall involving certain 2018-2019 Model Year Tacomas, 2008-2019 Model Year Land Cruisers, and 2008-2019 Model Year Lexus LX 570 vehicles in the United States.

Transport Canada Setting New Flight and Duty Time Limits

Transport Canada is also introducing amendments to the Fit for Duty regulations that will prohibit any flight crew member to work when not fit for duty. This includes consumption of alcohol or drugs, mental and physical conditions, and fatigue.

Incentive Federation Plans to Develop Standards

The Incentive Federation, Inc. announced Dec. 12 that it is finalizing proposals to both ANSI to be approved as a developer of a Domestic Standards Program for Workforce Incentives, Rewards and Recognition Standards, and to ISO to have a Technical Committee established to oversee those standards and to eventually have them approved by ISO.

$66,000 Fine Issued in Fatal California Trench Collapse

On May 9, two Empire Equipment Services workers were installing sewer pipes at the site when a 30-foot-wide section of the trench's sidewall sloughed and collapsed. Only one of the workers was able to escape.

Product Showcase

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars