Top Stories


NIOSH Announces Availability of $6 Million in Grants for Commercial Fishing Safety and Research

The grants will support research to improve the workplace safety of those in the commercial fishing industry and important training for this high-risk occupation.

New Minnesota Law to Help First Responders Get Workers' Comp for PTSD

The new law states that if a public safety employee such as a firefighter, corrections officer, or paramedic is diagnosed with PTSD, it will be presumed that the disorder is work-related.

Pennsylvania Agency Urges Residents to Test for Radon

EPA has set 4 picocuries of radon per liter (pCi/L) of air as an Action Level. For anyone who has a higher radon level than this, EPA, DEP, and the U.S. surgeon general recommend having a radon mitigation system professionally installed to lower it by venting radon to the outside.



Two Roofing Companies Cited for Fall Hazards at Colorado Site

"Fall hazards are well known in the roofing industry, and these employers should have taken the proper steps to protect their employees," said David Nelson, OSHA's area director in Greenwood Village, Colo.

DOE Awards Contract for Hanford Site Occupational Medical Services

DOE's announcement said the total estimated value of the contract is up to approximately $152 million.

ASSP Foundation Releases Fatigue Report

"By setting parameters, we identified behavioral changes in how people conduct work over time," said Dr. Lora Cavuoto, the project's principal investigator. "Wearable technology can uncover precursors to larger problems and help establish safety interventions that may call for scheduled breaks, posture adjustments, or vitamin supplements that help the body."

DOT Offering Grants for Automated Driving System Projects

As much as $60 million in federal grants will be available for projects that test the safe integration of automated driving systems on the nation's roads.

If respirators are still required (over the PEL) after looking at work practices/engineering controls, you obviously need to follow all requirements of a respiratory program.

Respirable Crystalline Silica in General Industry

Understanding the OSHA enforcement guidance will help you. It gets to the heart of what OSHA feels are key aspects of how it expects employers to comply.

You can make lots of mistakes that just cause wasted time, squandered money, or damaged customer relations, but it

Production vs. Safety: The Truth Behind the Myth

Next time you find yourself rushing, ask yourself if it was really because of circumstances beyond your control or another's unexpected action.

Plumbed eyewash stations are permanently connected to a source of potable water, whereas portable stations are self-contained gravity-fed units with their own flushing fluid that must be replaced after each use. (Radians photo)

Meeting the Requirements for Emergency Equipment

Employees must be trained to hold their eyes open during the flushing process. All employees also should be trained on how to use the emergency equipment fixtures before they handle hazardous chemicals.

OSHA is not alone in its belief on how to implement better safety results through management systems. (BROWZ, LLC photo)

The State of Contractor Safety

Host employers have experienced significant success within their employee safety programs by engaging their workforce and adopting a management systems approach to safety/health improvement.

We have only about 10 percent (perhaps less) of the total number of AEDs required if rapid defibrillation is going to be available to most people experiencing SCA.

A New Model for Increasing Cardiac Arrest Survival Requires We Fix the National AED Shortage, Too

The obvious reason for the AED shortage is the fact these life-saving devices are, with a few exceptions, not legally required at most locations. But voluntary deployments are clearly not getting the job done on their own.

Undertaking a walk-through survey using a hand-held, real-time sampler would give instantaneous indication of concentration. It also could be used to check the effectiveness of control measures. (Casella U.S. photo)

Why Qualifications Matter When Performing a Dust Hazards Analysis

It is important to know the qualifications, reputation, and experience of the outside vendor or individual who performs the DHA.

A distinguishing feature of this new standard is the inclusion of knuckles and fingers in the testing, where the EN 388 standard covers just the knuckles. The inclusion of the fingers is critical for industrial glove users, where the fingers are frequently at risk. (D3O photo)

ANSI/ISEA 138: The New Standard for Back-of-Hand Protection

Here's how better back-of-hand protection could be boosting your bottom line.

The availability of IoT devices and the actionable insights that they enable are impacting company culture and practices, empowering organizations to make better, more informed decisions. (Triax Technologies, Inc. photo)

Technology Innovations, Workplace Culture Enable a New Level of Construction Safety

Project teams can collect and view data across project sites—in real time, from any smart device—and drill down to the worker, equipment, or incident level.

Product Showcase

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence