Articles


Three Groups to Consider in Emergency Communication Plans

Knowing the types of emergencies to expect and what response is expected from each person makes it easier for employees to follow the instructions given by either on-site or external responders.

Measuring Behavioral Integrity of Safety Ownership and Improvement

Where there is no behavioral integrity, trust, relationships, and maturing the culture all suffer. Progress will be at a standstill.

OSHA Kicks Off Stand-Down in D.C.

The kickoff event will be held May 1 at The Wharf Project, a multi-use redevelopment project under construction on the District of Columbia waterfront. The project is moving toward an October 2017 grand opening.

Wholesale adoption of GHS hazard classsification principles will disrupt chemical hazard assessment programs and heighten problems manufacturers and importers will face.

Understanding Chemical Safety Following the Final GHS Deadline

Don't view the conclusion of this round of GHS deadlines as the end of the process, but rather the beginning of the new state of HazCom and what OSHA now expects for compliance.

Expanding Leadership Vision

In my experience in the realms of Safety performance, Magnifying Vision is the most underutilized of the three types of Visioning.

Having a device that does not fit properly will force workers to remove the protection from their ears, thus exposing them to dangerous levels of noise at various points throughout their work shift. (Cotral Lab, Inc. photo)

How to Choose the Most Effective Hearing Protection?

Decision makers must consider that in many cases, workers have to wear hearing protection for eight hours.

NSC Survey: 58 Percent of Construction Workers Say Safety Takes Back Seat to Productivity

The council reminds workers to put an emphasis on safety during Workers' Memorial Day.

NSF Launches Hearables Challenge

The contest seeks algorithms or methods for increasing the clarity of conversations in noisy settings.



Arizona Member is ASSE's 2017 Safety Professional of the Year

Jeremy Bethancourt in 2012-16 served on OSHA's Advisory Committee on Construction Safety and Health. "The best way to see the impact of Jeremy's efforts is to look on the OSHA website," said Bill Parsons, Air Force chief of occupational safety and a member of the New Mexico chapter. "A lot of the information given to the residential construction industry is due to the consultation and sharing he has provided."

Alabama Trucking Company Named an Imminent Hazard to Public Safety

FMCSA has ordered J & L Trucking to stop all interstate and intrastate operations after determining the company was an imminent hazard to public safety.

Turkish Automaker Wins $164 Million Loan to Expand, Add Training

"The €150 million financing to be provided will not only enable Ford Otosan to meet demand from domestic and international markets, it will also increase capacity utilization at our production facilities. We continue to invest in many areas, including human resources and working conditions, occupational health and safety, as well as the efficient use of resources and the prevention and control of pollution," said Haydar Yenigün, general manager of Ford Otosan.

This June, 30, 2015, photo shows NTSB Investigators Brice Banning and Clint Crookshanks examining wreckage from the aircraft  that had crashed five days earlier near Ketchikan, Alaska. (NTSB photo by Ketchikan Volunteer Rescue Squad – Jerry Kiffer)

NTSB Cites Company Culture in 2015 Crash of Alaska Sightseeing Plane

"Pilot decisions are informed, for better or worse, by their company's culture. This company allowed competitive pressure to overwhelm the common-sense needs of passenger safety in its operations. That's the climate in which the accident pilot worked," said NTSB Acting Chairman Robert Sumwalt, who was a pilot for 32 years, flying for both Piedmont Airlines and US Airways.

FDA Posts Warning Letters to 14 Companies Selling Illegal Cancer Treatments

The products from these U.S.-based companies are marketed and sold without FDA approval on social media platforms.

OSHA Judge Rules Massachusetts Companies Operated as Single Employer Where Workers Fell

An administrative law judge with the OSHA Review Commission ruled two companies were operating as a single employer at a Whenham, Massachusetts, worksite.

DOE Approves Sabine Pass LNG Export Bid

Golden Pass Products LLC, co-owned by Qatar Petroleum and ExxonMobil, is now authorized to export LNG up to the equivalent of 2.21 billion cubic feet per day of natural gas to any non-FTA country not prohibited by U.S. law or policy from a terminal near Sabine Pass, Texas.

Pennsylvania Audit Finds Big Financial Problems in Unemployment Program

The audit shows that, based on L&I's projections, $159.5 million in additional funding is needed over the next four years to maintain operations, avoid additional service center closings, and modernize the computer system.

Commenters Support OSHA Violence Standard for Health Care

Many commenters also support expanding the agency's definition of workplace violence.

Port Planning/Investment Toolkit Developed

"AAPA recognized the infrastructure project needs and funding concerns faced by America's ports," said Kurt Nagle, AAPA's president and CEO. "The capabilities to handle the mountains of freight that move through America's seaports each year require costly investments."

IARC Classifies Welding Fumes and UV Radiation as Group 1 Carcinogens

“Substantial new evidence” lead to the change.

HHS Awards Grants to Combat Opioid Crisis

The agency will administer $485 million to all 50 states.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence

Webinars