PPE


Crystal Manufacturer Fined $510,000 for Fatal Explosion

"The employer knowingly operated high-pressure vessels even after being warned of the potential for a catastrophic failure due to material design and fabrication defects," said OSHA's Dr. David Michaels. "This simply is unacceptable, and OSHA will use the full extent of the law to ensure the company is held accountable for its actions."

OSHA Pact Aims to Help West Texas Construction Workers

The agreement, which includes 15 worksites and approximately 53 subcontractors, focuses in part on reducing exposure to hazards and incidence of serious injuries and fatalities.

HAIs are estimated to cause 240,000 infections, 13,500 deaths, and $3.1 billion in excess health costs each year in California.

State-Specific HAIs Report Shows Progress

Health and Human Services Secretary Kathleen Sibelius hailed the CDC report released Thursday. It focused on central line-associated bloodstream infections, which cause an estimated $2.7 billion in added health costs nationally.

OSHA Hammers Construction Co. for Endangering Workers

The inspection was initiated under the agency's Construction Hazards Emphasis Program when an OSHA inspector observed employees working at heights of more than 14 feet without the use of fall protection.

OSHA Seeks Experts to Fill Seven ACCSH Vacancies

The agency needs nominees with experience and expertise in construction-related safety and health issues to fill two employee, two employer, one state safety and health agency, and two public representative seats to advise DOL on developing standards affecting the construction industry.

OSHA proposes limiting the use of spiral stairs

OSHA Proposes Sweeping Fall Protection/PPE Rule Revisions

The agency is seeking comment on, among other things, whether it should include an explicit reference to combustible dust or other hazardous material in the regulatory language of the final rule.

Complaint to OSHA Leads to Detailed Inspection for Auto Parts Maker

Following a thorough investigation, the agency issued two willful and 12 serious citations with total proposed penalties of $135,900. The alleged violations include arc flash hazards, insufficient hand protection, and industrial truck training deficiencies.

New Site Facilitates Glove Comparisons

The site by IRSST, a Montreal research agency seeking to prevent occupational injuries and illnesses, allows searches by glove model or hazard type.



Poll Reveals Hospitals' Difficulties Staffing for C. Difficile

Thirty-four percent of respondents said they have an infection control plan to increase interventions in the event of an outbreak of CDI, a condition frequently associated with previous antibiotic use and most commonly contracted by the elderly and those with recent exposure to hospitals, nursing homes, and other health care institutions.

OSHA Urges BP to Turn Fishermen into Oil Spill Cleanup Workers

Training of cleanup employees is ongoing throughout the Gulf Coast region. The agency has officials monitoring the training and observing the cleanup efforts that are already underway.

Har-Conn Chrome Charged with HexChrome, Electrocution Hazards

The Connecticut-based metal finishing company also was cited for not establishing a regulated work area and ensuring contaminated protective clothing remained in the work area, and for not conducting cadmium exposure sampling.

Honeywell is Buying Sperian Protection

The company announced today that its $1.4 billion bid has been approved by Sperian's board. This will vault Honeywell into the lead position among PPE manufacturers worldwide.

NJ Manufacturer's Sixth Inspection Results in 36 Citations

The 33 serious violations include a lack of training, electrical hazards, inadequate personal protective equipment, failing to implement an adequate hazard communication and respiratory protection program, and failing to properly handle confined spaces.

Construction Firm Faces $56,000 Fine for Fall Hazards in Pa.

During an inspection that was part of a regional emphasis program, investigators observed employees working without adequate protection on platforms as high as 20 feet.

Papers Sought for 2011 Protective Clothing Symposium

The ASTM International Committee F23 on Personal Protective Clothing and Equipment is sponsoring the June 16-17, 2011, event in Anaheim. Interested presenters must submit a 250-300 word abstract online by Aug. 15, 2010.

UAW Wants Comprehensive Metalworking Fluids Standard

The union, which represents some 390,000 active members, said May 11 that it filed its petition last month with OSHA.

The CSE Corp. SR-100 primarily uses a chemical process to generate a 60-minute supply of oxygen.

CSE Corporation Expands SR-100 Alert

The self-contained self-rescuer unit used by underground miners generates 60 minutes of oxygen when started, but the company's investigation suggests start-up oxygen cylinders may fail in any field-deployed unit.

Hear This: Free Seminars on Hearing Conservation to Take Place in Texas

The three-hour programs, designed to help prevent noise-induced hearing loss among workers, are set to take place in Dallas, San Antonio, Corpus Christi, and Houston, June 7-10, respectively.

Yet Another U.S. Postal Facility Fined, This Time in Chicago Area

Within the past five years, OSHA has conducted more than 900 inspections at USPS facilities across the country and has issued more than 600 citations.

Investigators Witness Fall Hazards, Fine Construction Firm $47K

Among other violations, the company failed to provide workers with a fall arrest harness with a lanyard and did not adequately plank scaffolding during masonry work that reached as high as 24 feet, OSHA said.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence