Noise Suppression Technologies, Inc. of Columbus, Ohio (www.noisesuppression.com) makes these Quilted Curtain Composites, which are used as enclosures to contain and absorb noise.

OSHA Shifts on Noise Exposure Standards

It is reversing the enforcement policy it has used since 1983, which allows most employers to use PPE and a hearing conservation program rather than engineering and administrative controls.

A "proposed interpretation" document published in Tuesday's Federal Register may be an enforcement milestone for OSHA because it reverses the policy it has used for 27 years in general industry and construction cases involving workers' exposure to noise. Since 1983, the agency has not cited employers who used PPE and a hearing conservation program rather than engineering and administrative controls, unless the noise is so high that it borders on 100 dBA when the most effective hearing protectors are used or the controls cost less than an effective hearing conservation program would cost. In practice, controls are almost always more expensive, so citations for failure to use them are rare. But they apparently will increase soon.

Signed by OSHA Assistant Secretary Dr. David Michaels, the document explains that OSHA proposes now to interpret 29 CFR 1910.95(b)(1) and 1926.52(b) as they are written -- and in accordance with the hierarchy of controls, which begins with engineering and administrative controls to reduce or eliminate exposures.

These sections of the two noise standards are almost identical. They say, "When employees are subjected to sound exceeding those listed [in tables within the standard], feasible administrative or engineering controls shall be utilized. If such controls fail to reduce sound levels within the levels [of the tables], personal protective equipment . . . shall be provided and used to reduce sound levels within the levels of the table."

The document says OSHA proposes to interpret "feasible" in the standards as meaning the same thing as it does in section 6(b)(5) of the OSH Act: "capable of being done" or "achievable." The agency further explained that it proposes to consider administrative or engineering controls economically feasible "if they will not threaten the employer's ability to remain in business or if the threat to viability results from the employer's having failed to keep up with industry safety and health standards."

The agency said it welcomes comments (www.regulations.gov, Docket No. OSHA-2010-0032) by Dec. 20 from interested parties on the proposed interpretation.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence