Top Stories


"But we cannot ignore those three million workers," OSHA

Three Million Workplace Injuries and Illnesses in 2013: BLS

OSHA's Dr. David Michaels said the declining rates are encouraging, “even during this period of healthy economic growth when we would expect the rate of injuries to rise.”

Seven Expert Tips to Keep You Safe on the Water This Winter

The Coast Guard says planning and preparation are important to any safe outing on the water.

More U.S. Hospitals Designated as Ebola Treatment Centers

In a collaborative effort, the CDC is training and assessing Ebola hospital readiness.



New Site Catalogs Residential Construction Devices

The site was developed by faculty members at Washington University in St. Louis and supported by CPWR (the Center for Construction Research and Training) through a NIOSH cooperative agreement.

About 25 percent of all on-duty firefighter fatalities occur while units are responding to or returning from incidents, and vehicle crashes cause most of the deaths, according to USFA.

NIOSH Creates Training Program on Emergency Responders and Fatigue

The 60-page document is meant to assist responders in health care, public safety, utilities, construction, humanitarian aid, and cleanup services.

MSHA Announces Results of October Impact Inspections

Federal inspectors issued 127 citations during special impact inspections conducted at 12 coal mines in October.

NHTSA Opens Investigation into Graco’s Handling of Largest Child Seat Recall in U.S. History

The agency will determine if Graco failed to report safety defect in a timely manner.

OSHA, NIOSH, National STEPS Network Sign Alliance

The agencies' leaders signed it during the 2014 OSHA Oil & Gas Safety and Health Conference taking place this week in Houston.

The rule will require employers to notify OSHA of work-related fatalities within eight hours and work-related in-patient hospitalizations, amputations, or an employee

HHS Reports Progress on Hospital-Acquired Conditions

They fell by 17 percent over a three-year period, according to a new report from the Agency for Healthcare Research and Quality.

EU-OSHA Launches E-Guide on Managing Stress and Psychosocial Risks at Work

The free guide is part of the Healthy Workplaces Manage Stress campaign.

NTSB Recommends Improvements for Certifying Lithium-ion Batteries

The agency determined that shortcomings in design and certification led to the fire in a battery being installed on a Boeing 787.

Increased heat brought on by climate change will be a problem for workers in numerous industries, NIOSH warns.

NIOSH Highlights Climate Change's Impact on Workers

The agency's Climate Change Occupational Safety and Health Work Group is working to determine OSH issues, identify gaps in worker protection, and make recommendations for safety and health improvements.

DOL Releases Sixth List of Goods Produced by Child or Forced Labor

Required by law, the new list contains 363 types of goods from countries that range alphabetically from Afghanistan to Zambia.

Welders need head-to-toe protection on the job, from welding helmets and protective apparel, as well as steel-toed boots.

Ensuring Full Protection

Welding processes require the use of head-to-toe protective gear, from head and face protection to steel-toed boots, as well as ventilation.

The Agricultural and Biological Engineering group of Penn State University is currently conducting a research project on hydrogen sulfide releases from manure pits, with a focus on farms using gypsum products as bedding for dairy cows. (Industrial Scientific Corporation photo)

Agricultural Safety, Sometimes Forgotten

There must be ongoing education of farmers, their families, and hired hands on the dangers of gases on farm properties.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars