Top Stories


Alstom

OSHA Cites Railcar Manufacturer for Hazardous Exposures

The agency has issued 17 serious violations and $105,000 in penalties for exposures at Alstom's Hornell, N.Y., plant.

Agencies Working to Stop Spread of Colistin-Resistant Gene

CDC and HHS are involved. The Department of Defense notified stakeholders this week that its Multidrug-resistant Organism Repository and Surveillance Network at the Walter Reed Institute of Research had identified the first colistin-resistant mcr-1 E. coli in a person in the United States.

Workers Exposed to Chemical Hazards at Fragrance Manufacturer

OSHA has issued one repeat, six serious, and one other-than-serious violation.



By continually raising awareness of the AED program, organizations reinforce a commitment to safety among employees. (American Heart Association photo)

Working Against Time: Nine Steps to Implementing a Successful AED Program

Setting up an AED program takes planning but is not difficult. Here are the key steps to implementing one within the workplace.

Yoga classes were the top wellness activity for incentives, and 41 percent of the survey

Keys to Employee Engagement

Yoga classes were the top wellness activity for incentives, and 41 percent of the MeetingsNet/IRF survey’s respondents said they consciously build wellness opportunities into their agendas.

Some are not aware that state-level Good Samaritan protections have advanced considerably over the years.

CPR and AEDs—Two Important Acronyms for Your Workplace First Aid Program

There are still scenarios where the AHA strictly recommends conventional CPR.

The final rule incorporates all or designated portions of several industry standards, including the American Petroleum Institute’s Standard 53, Blowout Prevention Equipment Systems for Drilling Wells, Fourth Edition.

Weighing BSEE's Well Control Rule

While Director Brian Salerno calls it "one of the most comprehensive offshore safety and environmental protection rules ever developed by the Department of the Interior," one industry group said the rule "could result in unintended negative consequences leading to reduced safety, less environmental protection, fewer American jobs, and decreased U.S. oil and natural gas production."

New ASSE Executive Director Welcomes the Challenge

"The board has made it clear it wants ASSE to improve service to our current members and attract new ones, bolster the educational outreach available through our professional development offerings, become a leader in developing OSH standards, and elevate the value of the profession within the business community," said Dennis Hudson, whose appointment is effective June 1. "It's a tall order, but with all 72 employees working together, ASSE will be better and stronger than ever."

Vendors and health care employees are at risk when unfamiliar with techniques and procedures required to properly handle materials that can be supporting dangerous fungi and bacteria.

Three Steps to Minimize the Risk of HAIs in Your Facility

Despite CDC recommendations, there is no law requiring infection prevention training for any construction worker or other vendor working in a health care facility.

The Georgia World Congress Center hosts Safety 2016, the American Society of Safety Engineers

Dateline Atlanta

For those who attended the 2015 National Safety Council Congress & Expo nine months ago, the facility’s layout and downtown Atlanta are familiar territory.

Recognition is important in hard times, where it is not uncommon for compensation to be cut or become unexpectedly static.

Strategic Planning in Hard Times: Why Safety Incentive Programs Are a Budget Trimming Tool

Here are a few responses that will help keep the red pen away from your program.

When using PPE, whether it

Use PPE in the Workplace and Keep Your 'Eyes' on the Prize

Next is the concern that PPE is unattractive or doesn't fit properly. If employees are content with their appearance, they will be more likely to use PPE.

Employers should consider the most likely types of injuries for the site when assembling first aid supplies. In hot working conditions, this would include supplies to treat heat-related illnesses. (J.J. Keller & Associates photo)

It's Not Just the Heat—How OSHA Enforces Occupational Exposures to Hot Environments

If an employee needs medical treatment for heat stress, you would mark that as an illness on the OSHA 300 Log.

Because of the synergistic effect of many chemicals with noise, wearing a respirator and hearing protection together is an ideal defense against hearing loss whenever chemicals and noise are simultaneously present. (Honeywell Industrial Safety photo)

Can Industrial Chemical Exposure Cause Hearing Loss?

It is important to remember that any chemical that is ototoxic is also likely to be poisonous to the kidneys, because the inner ear and the kidneys arise from the same germ layer during embryonic development.

Whenever heat stress has escalated to heat exhaustion, medical services should be called and on-site cooling of the person should immediately begin. Heat stroke can occur suddenly, without any symptoms of heat exhaustion.

Understanding the Ramifications of Heat in Work Environments

Non-weather dependent hot work environments are created by the heat generated and/or contained within the environment, due to the task being performed, or both.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars