Top Stories


World Standards Day 2018 Focused on Hazard Mitigation, Built Environment

ANSI and NIST hosted a World Standards Day 2018 event in Washington, D.C., on June 14 with expert discussions focused on codes and standards and their significant role in supporting strong, resilient 21st century infrastructure solutions.

NIOSH Publishes Final Research Agenda for Agriculture, Forestry, Fishing

The agenda document says during 2011-14, seafood processing workers experienced the highest injury/illness rate among all maritime workers: 6,286 injuries and illnesses per 100,000 workers, according to 2016 BLS data.

The rule will require employers to notify OSHA of work-related fatalities within eight hours and work-related in-patient hospitalizations, amputations, or an employee

Health Canada Regs Would Strengthen Surveillance of Drugs, Medical Devices

The proposed regulations would require hospitals to report all serious adverse drug reactions and medical device incidents, in writing, within 30 days of when the incident was first documented within the hospital.



AMA Delegates Adopt Several Gun Safety Measures

"People are dying of gun violence in our homes, churches, schools, on street corners, and at public gatherings, and it's important that lawmakers, policy leaders, and advocates on all sides seek common ground to address this public health crisis," said AMA Immediate Past President David O. Barbe, M.D., MHA.

SAMHSA Updates Toolkit to Help Prevent Opioid Deaths

The toolkit recommends that naloxone be made available to first responders and others who might respond to a possible overdose.

FRA Hosts First Positive Train Control Symposium

The agency will host two more this summer: July 16, focused on best practices for PTC system field testing and interoperability testing, and Aug. 20, focused on lessons learned and best practices for PTC Safety Plans.

NYC Department of Buildings Seeks 2019 Energy Code Advisory Committee Members

Applications from those seeking to be considered for 2019 Energy Code Advisory Committee membership must submit a completed application no later than June 21. Residential applications are especially needed, according to the department's posted announcement.

Nominations Being Accepted for 2018 Governor's Lifesaving Awards in Washington State

To be eligible, the life-saving incidents must have occurred during work hours and must have taken place between June 1, 2017, and May 31, 2018. The deadline for nominations is June 30.

OSHA Cites Wisconsin Contractor for Fall Hazards

"Employers are required to provide fall protection to employees working in construction at heights above 6 feet," said Robert Bonack, OSHA Appleton Area Office director. "This employer's repeated failure to comply with federal safety requirements exposes employees to fatal injuries from fall hazards."

Final Rule Will Streamline Bill Processing for Disabled Miners

The new regulations adopt industry-standard payment formulas derived from those used by Medicare and are similar to those used by other OWCP-administered compensation programs for federal employees, and the rule codifies the black lung program's current payment practice for prescription drug payments.

NSC Survey Finds 90 Percent of Employers Negatively Impacted by Employee Fatigue

NSC Survey Finds 90 Percent of Employers Negatively Impacted by Employee Fatigue

According to the council, 13 percent of workplace injuries can be attributed to fatigue. In the survey report, NSC identifies night shift and overtime scheduling, a lack of time off between shifts, and inadequate rest areas for employees within the workplace as some of the factors contributing to worker fatigue.

Safe Work Australia Publishes Guidance on Work-related Mental Health

The guide is built around three main sections: Preventing Harm, Intervening Early, and Supporting Recovery. It outlines a systematic approach to ensuring workers' psychological health and safety that revolves around the elements discussed in the three sections.

Will e-Manifests Make Life Easier or Harder for EHS Pros?

Will e-Manifests Make Life Easier or Harder for EHS Pros?

Advances in technology often simplify our lives and make our work day easier—will this be the case with e-Manifests? Or will the new electronic tracking system become a boondoggle for shippers, transporters, and receiving facilities?

NASA Successfully Flies Unmanned Plane in California

"This is a huge milestone for our Unmanned Aircraft Systems Integration in the National Airspace System project team," said Ed Waggoner, NASA's Integrated Aviation Systems Program director. "We worked closely with our Federal Aviation Administration colleagues for several months to ensure we met all their requirements to make this initial flight happen."

NFPA Stresses Electrical Safety Around Water for Summer

NFPA Stresses Electrical Safety Around Water for Summer

There are many electrical hazards in swimming pools, hot tubs and spas, on board boards, and in the waters surrounding boats, marinas, and launch ramps.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence