Top Stories


New Managing Director Named at NTSB

Sharon Bryson had served as deputy managing director for about a year; as managing director, she is responsible for assisting the NTSB chair with all aspects of the day-to-day operations of the agency.

Pilot Study Shows Visual Literacy Training Improves Hazard Recognition

“About 90 percent of the information people consume is visual,” said John Dony, director of the Campbell Institute. “Taking in that much visual data can lead us to have inattentional blindness – only seeing what we deem important to see but being blind to many other details, like potential hazards. That’s why training workers to better see where those hazards might exist is crucial to workplace health and safety.”

ISEA Releases New Glove Standard on Impact Performance

While standards for industrial gloves that protect hands from cuts, punctures, abrasions, and chemical exposure have long existed, ANSI/ISEA 138 is the first standard to address the risk to hands from impact injuries in North America.



Nearly 20,000 U.S. Staph Deaths Last Year, CDC Reports

CDC experts say health care tactics such as decolonization (reducing germs people may carry and spread) before surgery and following CDC's current recommendations could prevent more staph infections.

FDA Commissioner Dr. Scott Gottlieb Resigns

According to CNN, Gottlieb is leaving to spend more time with his family. He had been commuting to Washington weekly from his home in Connecticut.

DC Employment Services Launches Spanish Website

Mayor Muriel Bowser's office also announced a new $100,000 grant that will expand access to bilingual work readiness training services in high-demand and rapidly growing job sectors.

Senate HELP Panel Holds Hearing on Preventable Disease Outbreaks

One witness expected to testify is John Wiesman, DrPH, MPH, secretary of health with the Washington State Department of Health, who has been dealing with a measles outbreak in the state. As of March 3, 71 confirmed cases had been reported in Washington state this year.

Use Daylight Saving's Start to Check for Vehicle Recalls, NHTSA Urges

During 2018, there were more than 900 vehicle recalls affecting more than 33.5 million vehicles in the United States. "Every vehicle recall is serious. Yet only about 75 percent of vehicles recalled in a given year are ever fixed. That puts you, your passengers, and others on the road at risk," NHTSA noted.

New Chairs Announced for Z359, A10 Standards Committees

Thomas Kramer, P.E., CSP, is the new chair of the Z359 Fall Protection Committee and John Johnson, CSP, is the new chair of the A10 Safety Requirements for Construction and Demolition Operations Committee. Both will serve three-year terms that can be reaffirmed for longer periods of service by the committees.

DOT Inspector General Auditing Controls of FAA's STARS

The audit will assess FAA's identification and mitigation of security risks in STARS and determine whether its contingency planning limits the effects caused by the loss of STARS operations at large Terminal Radar Approach Control facilities during emergencies.

Resident Inspectors Chosen for New Vogtle Units

Nuclear Regulatory Commission officials in Atlanta recently announced the selection of Kenya Carrington and Patrick Heher as resident inspectors for the construction of Vogtle Units 3 and 4, new units being built near Waynesboro, Ga.

GHSA Projects 2018 Pedestrian Fatalities Highest Since 1990

A new report from the Governors Highway Safety Association projects that 6,227 pedestrian fatalities took place on U.S. roads in 2018. The projection would be the highest number of pedestrian fatalities since 1990.

L&I VPP Seminar Set for March 19

The keynote speaker is Michael Wood, CSP, administrator for Oregon OSHA and a former L&I manager, who will address the challenges of making workplace health and safety a reality through effective leadership, consistent messaging, and safety fundamentals.

It is important to remember to attempt to capture the worker

Refreshing on the Basics of Noise and Hearing Conservation

Understanding what the rules are is only half of the battle with noise. The other half is assessing noise levels and utilizing effective controls.

Although adopting Lean is ultimately something of a paradigm shift for most companies, getting started is easy. (Southland Industries photo)

Leaning into Construction Safety

Lean principles ensure everyone is on the same page from day one of a project and that each team member maintains a shared understanding of tasks, risks, goals, and procedures throughout construction.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars