Top Stories


Wearable Sensors: 'Tremendous Opportunity,' Some Challenges

Potential benefits of the technologies include preventing and mitigating injuries, decreasing the extent and duration of disability, enhancing employee wellness, and improving productivity. Injury prevention studies of wearable technologies' effect are rare, however, and employee acceptance of them could be an implementation challenge, two speakers said during an AIHce EXP 2019 session.

Biosafety Issues in Focus in AIHce Conference

For the first time, U.S. physicians' rates of suffering needlesticks and sharps injuries exceeded nurses' rates during 2017, an International Safety Center presenter said during a "Biosafety Issues in IH" session at the AIHce EXP 2019 conference.

Most Highway Contractors Have Experienced Vehicle Crashes at Work Sites: AGC Study

According to a new highway work zone study conducted by the Associated General Contractors of America, 67 percent of highway contractors report that motor vehicles had crashed into their construction work zones during the past year.



NIOSH Robotics Joining More Partnerships

The NIOSH Center for Occupational Robotics Research has partnerships in placed with the Robotic Industries Association, Ohio State University, and North Carolina State University ISE. It will partner with the National Science Foundation a year from now, said Chuck Geraci, Ph.D., CIH, FAIHA, who is NIOSH's associate director for emerging technologies.

Are Smart Phones Smart to Use on a Work Site?

Communication is critical on construction sites. Whether for coordinating movement of materials or issuing warnings, it is important that workers be able to clearly communicate with each other.

Virginia Recognizes 20 Mines, Nine Miners for Excellence in Worker Safety

Five surface mines will also receive a special award in honor of the entire crew working five years without a lost time accident.

NTSB: Inadequate Planning, Insufficient Training Led to Fatal 2017 Amtrak Derailment

IMAGE: SEATTLE TIMES

NTSB: Inadequate Planning, Insufficient Training Led to Fatal 2017 Amtrak Derailment

Failure to provide an effective mitigation for a hazardous curve and inadequate training of a locomotive engineer led to the overspeed derailment of an Amtrak passenger train that hurtled off a railroad bridge and onto a busy DuPont, Wash., highway, the National Transportation Safety Board announced Tuesday.

WorkSafeBC Releases New Resources on Noise-Induced Hearing Loss in the Service Industry

WorkSafeBC aims to raise awareness about the risk of hearing loss in the service industry with the release of a new safety bulletin and other resources for workers and employers.

NSC Estimates 380 Roadway Deaths During Memorial Day Weekend

NSC Estimates 380 Roadway Deaths During Memorial Day Weekend

For the first time in four years, the National Safety Council estimates fewer than 400 fatalities on the road during Memorial Day weekend.

British Safety Council Calls for UK to Recognize Air Pollution as Occupational Health Hazard

The British Safety Council’s recently released report, Impact of air pollution on the health of outdoor workers, makes an argument for recognizing air pollution as an occupational health hazard in Britain.

3M PSD's 2019 Scholarships Awarded at AIHce

In the 33rd year for these scholarships, the 3M Personal Safety Division is giving $5,000 to three students who are pursuing graduate degrees in occupational health and safety/industrial hygiene.

The LEED-certified, 1.6 million-square-foot Minneapolis Convention Center features 475,000 square feet of exhibit space and 87 meeting rooms. (Minneapolis Convention Center photo)

Yucca Mountain Workers' Health Concerns Highlighted

Workers at the Yucca Mountain Project in Nevada could be exposed to potentially serious respiratory and radiation hazards if the long-planned High Level Nuclear Waste repository is revived and advanced by Congress, two presenters explained in an educational session at this week's AIHce EXP 2019 conference and expo here.

NIOSH Details New Tools for Chemical Risk Assessment, Management

AIHce EXP 2019 attendees filled a meeting room May 20 to learn about current NIOSH work projects on chemical risk assessments and management of those risks

FAA Changes Recreational Drone Rules

Until further notice, ATC facilities will no longer accept requests to operate recreational drones in controlled airspace on a case-by-case basis. Instead, FAA is granting temporary airspace authorizations to fly in certain "fixed sites" in controlled airspace throughout the country.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence