Top Stories


U.S. Department of Labor Cites Fort Worth Masonry Company for Exposing Workers to Fall Hazards

U.S. Department of Labor Cites Fort Worth Masonry Company for Exposing Workers to Fall Hazards

RM Masonry and Stucco exposes workers to unsecured scaffolding repeatedly.

A North Carolina-Based Health Care Provider Terminates Employees for Not Getting the COVID-19 Vaccine

A North Carolina-Based Health Care Provider Terminates Employees for Not Getting the COVID-19 Vaccine

Employees who received exemptions from getting vaccinated must follow specific protocols while at work.



Ohio Roofing Contractor Continues to Defy Federal Safety Requirements for Fall Protection

Ohio Roofing Contractor Continues to Defy Federal Safety Requirements for Fall Protection

The contractor was cited six times in five years for ignoring the industry’s deadliest hazard.

Recognize These Scams Targeting Trucking Companies

Recognize These Scams Targeting Trucking Companies

Trucking companies face many hazards, from poor road conditions to inclement weather to mechanical failure. One less obvious but equally pressing threat facing this industry is fraud.

U.S. Department of Labor’s OSHA will Hold a Virtual Meeting to Discuss Improvements on its Whistleblower Protection Program

U.S. Department of Labor’s OSHA will Hold a Virtual Meeting to Discuss Improvements on its Whistleblower Protection Program

OSHA has questions and comments about what it can do to improve its whistleblower service.

See You Next Year: ASSP to Host Safety 2022 in Chicago

See You Next Year: ASSP to Host Safety 2022 in Chicago

Safety 2022 will be in Chicago, Illinois next year from June 27 - 29, 2022.

Live From ASSP Safety 2021: Wrap Up

Safety 2021 might be over, but there is still much to see when it comes to OH&S’ live coverage of the event.

White House, OSHA Look to Enhance Measures for Extreme Heat

White House, OSHA Look to Enhance Measures for Extreme Heat

As part of an interagency effort to protect workers, the Biden-Harris administration enables OSHA to begin rulemaking process for a federal standard.

Back on the Road: OH&S Goes to Austin for ASSP Safety 2021

Episode 97

Back on the Road: OH&S Goes to Austin for ASSP Safety 2021

Curious what it was like at ASSP's Safety 2021 show in Austin, Texas last week? Editor Sydny Shepard gives an inside look at the conference as well as the planning that went into the event in the face of COVID-19.

Combustible Dust and PPE — 2 NFPA Standards to Know to Improve Safety Culture

Episode 96

Combustible Dust and PPE — 2 NFPA Standards to Know to Improve Safety Culture

OH&S editor Sydny Shepard sits down with Westex: A Milliken Brand’s Scott Francis to talk all about combustible dust. Listen in to find out why combustible dust is so hazardous and what NFPA standards apply.

Local Health Departments Plan for a Potential COVID-19 Booster Shot Amid Confusion

Local Health Departments Plan for a Potential COVID-19 Booster Shot Amid Confusion

More than 1.9 million people have already received an additional dose since mid-August.

U.S. Department of Labor Urges Employers and Workers to Keep an Eye out for Hazards following Hurricane Nicholas

Unsafe work conditions due to a southern hurricane call for extra safety precautions.

Setting the Example: ASSP’s Road to Safety 2021

Editor Sydny Shepard sits down with ASSP to talk about the long journey to planning for ASSP Safety 2021.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Most   Popular

Artificial Intelligence

Webinars