Articles


BSEE's FY2015 Budget Request Totals $204.6 Million

The amount will be offset by $123.6 million in BSEE collections.

OSHA asked for comments on its Process Safety Management standard, potential changes to PSM enforcement policies, and potential updates to its Explosives and Blasting Agents, Flammable Liquids and Spray Finishing standards.

OSHA Extends PSM Comment Period to March 31

The agency wants more input about a request for information published in December 2013 as part of the multi-agency process to improve chemical facility safety.

DOT's Proposed Budget Invests $90 Billion in Safe Transportation

The proposed plan would put $90.9 billion into safe and innovative transportation programs.

OSHA Cites Company Following Combustible Dust Explosion

The agency has cited Inferno Wood Pellet Inc. of East Providence, R.I., following a combustible dust wood explosion and fire.

Cheese Recalled for Possible Listeria

Roos Foods recalls even more cheese products for possible listeria contamination.

CDC Recommends Antibiotic Stewardship Programs for Hospitals

"Improving antibiotic prescribing can save today's patients from deadly infections and protect lifesaving antibiotics for tomorrow's patients," said CDC Director Dr. Tom Frieden, M.D., MPH.

The Oregon OSHA document covers the selection of head-to-toe PPE.

OR-OSHA Guide Explains PPE Selection for Applying Pesticides

It covers head-to-toe protection, including charts comparing the protection of various coverall types and chemical-resistant glove options.

NTSB to Offer March Safety Courses

The courses will cover interviewing, transportation disaster response, aircraft accident investigation, and more.



This CSB photo shows the aftermatch of the dust explosion and fire on Feb. 20, 2003, at the CTA Acoustics manufacturing plant in Corbin, Ky. killing seven workers.

Miller Still Pushing for OSHA Combustible Dust Rule

He proposed an amendment Feb. 27 to the All Economic Regulations Are Transparent Act (H.R. 2804) that would have exempted the regulation from the act's requirements, but it was defeated.

IMO Guidance Settles Security Training Quandary

It will solve the problem that many seafarers "were reportedly unable to have access to approved training courses or were unable to be issued certification of security-related training in accordance with the STCW regulations."

The Wanapum Dam is downstream from the Vantage Bridge, which is the Interstate 90 crossing over the Columbia River in Washington state. (Grant County Public Utility District photo)

Engineers Monitoring Crack in Columbia River Dam

Water levels above the Wanapum Dam are being reduced to 20 feet lower than the normal high operating level to reduce pressure on the spillway after divers found a 2-inch-wide crack that was 65 feet long in the base of one of the spillway piers.

MSHA Releases January Inspection Results

The agency releases the results of January inspections, which resulted in 198 citations.

The public has 45 additional days to file comments about the BSEE proposed rule affecting offshore oil and gas operations.

Comfort is the Secret to Success

Check for compatibility. It's important to have your employees suit up with all of their gear when fitting a hearing protector.

This image is a screen capture from a 2013 Bulwark video showing an arc and flash fire rated rain suit being exposed to a three-second flash fire. The test method depicted in the video is ASTM F 1930, which is the flame exposure test used in NFPA 2112 and ASTM F 2733.

The Importance of Specifying NFPA 2112 Certified Garments for Flash Fire Protection

The real question is, for you as a safety professional, how much is your “peace of mind” worth?

The free web mobile app for hazmat responders has been downloaded almost 83,000 times, PHMSA reported Aug. 30.

Extremely Hazardous Substances and 112(r) Plans

Even with the best standard operating procedures, spills can still happen--often when they are least expected.

There is a real opportunity to deliver a better safety experience for people working in risky environments through innovative products. (BW Technologies by Honeywell photo)

Is Passive Passé?

There is a real opportunity to deliver a better safety experience for people working in risky environments through innovative products.

The two DOT agencies are conducting audits, and PHMSA is making unannounced inspections, to ensure railroads

Tank Car Debate Rolls On

While the Association of American Railroads supports requiring older tank cars used to transport flammable liquids to be retrofitted or phased out, many other stakeholders firmly oppose a retrofit.

Head protection that is either too large or too small is inappropriate for use, even if it meets all other requirements.

Tips for Selecting and Maintaining Hard Hats

In the United States, make sure that every hat is permanently marked with "ANSI" on the shell and the suspension so you know it meets or exceeds national standards.

The most important solutions to heat stress are frequent rest and water breaks in the shade.

Beyond OSHA

The most important solutions to heat stress are frequent rest and water breaks in the shade. If laborers work in the sun they absolutely must have tents or shade sails available with cool water and seating.

A staged explosion is used to test a dust collector

Combustible Dust Compliance: Avoiding Common Pitfalls

It takes ongoing vigilance and management of change to identify conditions in your plant that might cause a potential safety problem.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence