Articles


Roofing Contractor Puts Worker in Danger 72 Hours after Previous Death: OSHA

OSHA says Kolek Woodshop Inc. shows "blatant disregard" for workers' safety.

New Jersey Gas Station Attendants Receive $5.5 Million in Back Wages

Wage and hour violations were found at Shell, Exxon, BP, and others, according to DOL.

Nanorama Laboratory Tool Now Available in English

This free online tool was developed by the Innovation Society in collaboration with the German Social Accident Insurance Institution for the raw materials and chemical industry. It offers information on safe handling of nanomaterials.

The Cal/OSHA warning urges employers not to use non-conforming steam boilers.

Cal/OSHA Issues Warning on Non-Conforming Steam Boilers

"Employers are required to prevent potential hazards to workers, and using equipment that meets required safety standards is essential," said Christine Baker, director of the Department of Industrial Relations.

OSHA Issues Alert Letter to Hope Elephants Following Worker's Death

The elephant refuge has been instructed to follow industry safety standards.

Lumber Liquidators Facing CPSC Investigation

Federal safety investigators are looking to see whether some of its flooring contains dangerous levels of cancer-causing chemicals.

FDA Urges Manufacturers to Drop 'Latex Free' Claim

Labeling statements such as "latex free" or "does not contain latex" are not sufficiently specific, not necessarily scientifically accurate, and may be misunderstood or applied too widely, according to the agency.

Maryland

Maryland's Toward Zero Deaths Campaign Paying Off

Traffic fatalities in the state during 2014 fell to 442, the lowest number since 1948, officials announced March 24.



Germanwings Cancels Flight on Crashed Aircraft's Route

"Some crews are not ready to work today due to sorrow and emotional distress. The company is sympathetic to this as in some cases the employees have lost good friends among the crew involved in the accident. Although they would not actually have been on duty, other crew members have reported voluntarily for work in order to support us," the company's March 25 announcement states.

OSHA: Serial Violator Charged with Contempt

Stephen Lessard ignored safety hazards and failed to pay $404,000 in assessed fines, the agency charges.

FHWA Kicks Off National Work Zone Awareness Week

FHWA Kicks Off National Work Zone Awareness Week

DOT is reminding drivers to stay alert while driving near highway work zones.

Child's Injury Prompts Residential Elevators Recall

Coastal Carolina Elevators LLC is recalling the Elmira Hydraulic elevators after receiving three reports of incidents, the Consumer Product Safety Commission announced.

OSHA Accepting Nominations for Five FACOSH Members

The openings are for three management and two labor representatives to serve three-year terms, effective Jan. 1, 2016. May 15 is the deadline for nominations.

Foundation Seeks Sponsors for Contaminant Removal Project

This is an important issue for the fire service, NFPA’s Susan McKelvey noted March 20.

The NTSB roundtable on distractions in transportation will feature approximately 40 experts.

NTSB Hosting Roundtable on Distractions' Hazards

Distractions in transportation is an item on the agency's 2015 Most Wanted List. The March 31 event in Washington, D.C., is open to the public.

Trenching Violations Cited

OSHA has issued $79,900 in proposed fines to SER Construction Partners Ltd. The investigation began in January as part of the National Emphasis Program on Trenching and Excavations.

58-year-old Worker Dies Due to Ignored Safety Hazards, OSHA Claims

OSHA has cited Hussman Corp. for three willful and 12 serious hazards.

OSHA Fines K&F Construction $109,000

The Martinsburg, W. Va., Company is a framing, sliding, and roofing contractor.

DOJ Finds Deficiencies in San Diego PD's Approach to Misconduct Cases

The department had volunteered to undergo the review by the Office of Community Oriented Policing Services following a series of misconduct incidents over the course of five years.

FRA Requires Retrofitting of Unapproved Tank Car Valves

The agency's March 13 order gives owners 60 days to replace any 3-inch McKenzie UNNR ball valve in a tank car used to transport any hazardous material described in 49 CFR 172.101 and 90 days to remove the 1-inch and 2-inch valves.

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars