Articles


Meeting Set for Emergency Response and Preparedness Subcommittee of NACOSH

The meeting will be held on Sept. 9, 2015 in Washington, D.C.

Roofing Contractor Sentenced for Making False Statements to OSHA Inspectors

The statements were made following an incident that seriously injured three workers.

Getting the tablet off the lap is most important when looking for ways to eliminate poor neck posture.

The Trouble with Tablets

Tablets are unlike traditional PCs because they are used in different locations, with different postures, while doing other things. Because of this, the ergonomics with a tablet become far more challenging.

Continuous wireless gas detection technology tracks exposure in real time and automatically logs data. (U.S. Department of Energy photo)

Keeping Communities and Workers Safe From Benzene

Wireless gas monitoring is flexible and provides more control—at a time when regulators are about to make sure you have such control.

Protect hearing every day with quality hearing protection, not just because OSHA requirements and other federal regulations demand it. (Radians photo)

Combat Workplace Noise Pollution to Help Prevent Hearing Loss

Yikes! Hearing loss is the third-leading major U.S. public health issue.

The OSHA Technical Manual states that when combinations of HPDs are used, the total noise reduction will be the greater of the two NRR plus 5 dB.

Hearing Protectors On the Job Site

Employers should not focus only on the NRR when selecting protectors.

Don

DOT and OSHA Training

Don't forget your company's management and maintenance personnel. The regulations require training of all motor carrier employees.

NFPA 70E-2015 specifically defines ear canal inserts (ear plugs) as the required protection in all arc flash zones.

Arc Flash Hearing Protection

What requirements must a hearing protector meet for arc flash protection?



A joint IRF and Incentive Gift Card Council study found that incentive program planners believe gift cards have more impact and better ROI than cash.

Wellness and Safety Programs Expand to Embrace Employee Wellbeing

HR managers can leverage their position in highlighting the value of employees and use their knowledge and skills to drive positive outcomes.

Blueprints for Successful Cultural Leadership

Expert leaders provide hope, deepen relationships, and work toward bringing people together.

OSHA

First-Class Protection

Employers can ensure their sites comply with OSHA's 1910.133 eye and face protection standard by following the fundamental hierarchy of controls.

"From our experience, the easiest to measure, things like weight loss, exercise, health assessments, are the most common and have the greatest ongoing effect."

The Wellness Imperative

"The value proposition is simply that if they are properly built, they will work, period."

Employers should train workers on proper lifting techniques, helping even younger employers to understand the importance of preventing injuries and the cumulative damage that poor lifting techniques can cause.

Preventing Manual Handling Injuries

There is no question that musculoskeletal disorders continue to be a leading cause of lost-time injuries among U.S. workers.

All batteries, regardless of the type, discharge over time and need to be replaced or recharged.

IOM Looks to Improve Cardiac Arrest Survival

A new report calls on all parts of the health care system to adopt quality improvement programs in areas such as cardiac arrest, tracking system performance, accountability, and training.

Studies show that to create a specific change in behavior or attitude costs over three times more if cash is used as the reward instead of a non-cash "recognition gift."

Why Incentives Are a Key to Surviving Tight Safety Budget Challenges

I continue to conclude that non-cash incentive programs are a strategic tool to economically and effectively maximize effectiveness of any ES&H goal set.

Because the most hazardous conditions are often in dark places, many manufacturers offer a complete line of Division I safety-rated lights for use when an explosive atmosphere is likely to exist under normal operating conditions. (Streamlight Inc. photo)

Optimizing Worker Safety: It's in the Lights

State-of-the-art flashlights protect against workplace hazards.

Triumph Motorcycles Agrees to Penalty in Failure-to-Report Case

NHTSA announced that it investigated after the company recalled more than 1,300 motorcycles for a defect that could reduce steering capability, and the company filed a late response to a NHTSA Special Order.

When indoor temperatures and humidity get higher than the recommended levels, the moisture in the air allows mold to grow. And growing mold gives off odors and volatile organic compounds.

Odors, Smells & Other Strange 'Stuff'

Any time there is moisture, we can get mold growth, especially when relative humidities are greater than 60 percent and the temperatures are higher than the recommended temps.

What It Takes to Make Behavior-Based Safety Work

While it is desired for all employees at all levels to eventually be involved, perceptions about trust and the use of the data will initially determine who is an observer.

Poor IAQ in the workplace has also been linked to longer-term effects, such as asthma and even cancer.

Innovative Approach to Duct Sealing Turns IAQ Problems Inside Out

Thanks to innovative technologies such as aerosol-based duct sealing, solving issues and attaining optimal indoor air quality is easier now than ever before.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence