Articles


OSHA Occupational Safety and Health Committee Schedules Fourth Emergency Response Meeting

The meeting is for the Emergency Response and Preparedness Subcommittee.

OSHA Finds Multiple Hazards After Battery Manufacturer's Worker Loses Part of a Finger

Exide Technologies also received an alert letter for a lack of heat-stress program.

FRA Makes $25 Million Available for Infrastructure Upgrades

The Obama administration has also requested $2.3 billion in the FY2017 budget.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

American Coatings Association Pushing for TSCA Reform Bills

ACA has supported two bills: the Frank R. Lautenberg Chemical Safety for the 21st Century Act, S. 697, which passed the U.S. Senate on Dec. 17, 2015, and a House of Representatives bill, H.R. 2576, which passed June 23, 2015, on a 398-1 vote.

OSHA Cites Berlin Builders Inc. Again for Fall Violations

Nicholas DeJesse, director of the agency's Philadelphia Area Office, said "A developer and contractor that hire this company are truly rolling the dice on worker safety. Amid the hazards we have cited, two Berlin Builders' employees suffered falls in 2015. This employer must make immediate changes before something worse happens."

Convenience Store Where Employed Died in Robbery Cited for Lack of Safety Protections

One willful citation was issued to Jay Management Inc.

Manufacturing Company Cited for Amputation Hazards

Lynar Corp. faces $54,000 in fines.

L&I Honors 84 at Worker's Memorial Day Ceremony

The agency reports that recent data shows construction, agriculture, logging, and jobs that require driving are among the most hazardous jobs for Washington workers, and that falls continue to be a leading cause of workers' deaths. Six work-related deaths in 2015 were homicides.



"It was quite startling to see" the 2014 increase in the U.S. fatality rate for workers 55 and older, with 1,691 occupational deaths in this group, AFL-CIO Director of Safety and Health Peg Seminario said in April 2016.

Older Workers' Risks Highlighted in AFL-CIO's 2016 Report

Other high-risk work groups cited in the report are oil and gas extraction workers (144 deaths in 2014), health care workers who may face workplace violence hazards (765 occupational fatalities in 2014 were attributed to workplace violence), and Latino workers (804 deaths in 2014 and a fatality rate of 3.7 per 100,000 workers).

DOT Agencies Hosting Three Meetings on Sleep Apnea

The public listening sessions will begin May 12 in Washington, D.C., before moving to Chicago and Los Angeles. Stakeholders also may submit written comments until June 8.

NSC Says Workplaces Have Highest Number of Unintentional Deaths Since 2008

The agency has called for a renewed dedication to occupational safety.

Mitsubishi Motors Admits to Running False Mileage Tests Since 1991

An internal investigation discovered the tampering.

DOT May Issue Rule Mandating Annual Inspections of Passenger-Carrying Commercial Vehicles

FMCSA must assess: the risks associated with improperly maintained or inspected CMVs designed or used to transport passengers; the effectiveness of existing federal inspection standards in mitigating the risks associated with improperly maintained vehicles and ensuring safe and proper operation; and the costs and benefits of a mandatory inspection program.

ERG2016 Now Available

PHMSA will distribute more than 1.5 million free copies of the guidebook to firefighters, emergency medical technicians, and law enforcement officers nationwide -- the goal is to have one in every public service vehicle across the country.

DOL Final Rule Opens Up Black Lung Medical Data

"This rule makes clear that coal miners have a right to know a full picture of their health. No workers should lose their lives because of known dangers that were kept from them in the interest of their employers," said DOL Office of Workers' Compensation Programs Director Leonard Howie.

GE Lamp Plant Cited for Serious Violations

OSHA has cited GE's Circleville, Ohio, plant for two repeated and three serious safety violations.

Wisconsin Paper Mill Cited after Fatality

The company was previously cited in 2012 for machine hazards, according to OSHA.

Early Voting Begins on Austin's Ride-Hailing Security Ordinances

Austin's mayor announced April 25 that he opposes the ordinance from Uber and Lyft that would repeal the city's current requirement to have drivers fingerprinted as part of a national criminal background check.

NFPA 70E-2015 specifically defines ear canal inserts (ear plugs) as the required protection in all arc flash zones.

Oregon OSHA Offering On-Site Consultation During National Stand-Down

Last year's national stand-down reached more than 2.5 million workers and federal OSHA's goal is to reach 5 million workers this year.

Fatigue Management Guide for General Aviation Released

The guide is based on the work of the ICAO Fatigue Risk Management Systems Task Force and includes input from experts with experience in general aviation operations.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars