Articles


BSEE Expands SafeOCS Program

The program now includes the confidential collection of equipment failure data.

NTSB Revealing Most 2017-2018 Wanted List Nov. 14

"Since 1990, our annual Most Wanted List has been our roadmap from lessons learned to lives saved," NTSB Chairman Christopher Hart said. "It represents actions which, if taken, will save lives and reduce the number of people injured, and amount of property, damaged in transportation accidents."

Minnesota's Workplace Injury Rate Reaches New Low

The state had an estimated 3.5 OSHA-recordable nonfatal workplace injuries and illnesses per 100 full-time-equivalent workers in 2015, and the estimated rate was 3.7 cases per 100 FTE workers in 2014 and 3.9 in both 2013 and 2012.

New Report Plots MH370's Final Plunge

A report from the search's lead agency, the Australian Transport Safety Bureau, includes several calculated flight paths the aircraft may have taken as it plunged toward the ocean. The report also explains why investigators concluded a recovered flaperon was retracted upon impact.

Lots of Ideas From Transit Workers in Dialogue on Assaults

They cited the need for fully functional, modern technology, including video surveillance equipment to ensure the safety of transit workers, as well as de-escalation training for workers, passenger education campaigns, and increased police presence, Acting Federal Transit Administrator Carolyn Flowers reports.

NIOSH Study Finds Adherence to Anesthesia Care Practices is Lacking

The study did find that scavenging systems are widely used, however.



Medical- and Disability-Related Leave Advisor Tool Now Available

The tool will help workers and employers understand the leave they are entitled.

SAMHSA Sets National Prevention Week for May 14-20, 2017

National Prevention Week (#NPW2017) is an annual health observance dedicated to increasing public awareness of mental and/or substance use disorders. The 2017 theme is Making Each Day Count.

A glove that is too thick or has material that is too inflexible for a specific task will decrease finger dexterity and increase hand fatigue. (SW Safety Solutions Inc. photo)

Why Quality Manufacturing Matters

Get a grip on safety with new single-use glove technologies.

Because painkiller prescriptions are written by primary care physicians or pain specialists, patients may perceive that they are receiving credible treatment, not realizing the risks of misuse or abuse, and assume that pills are safe to take for any reason and under any circumstance.

What You Need to Know About Prescription Painkillers and Safety Risks

The low number of employers who offer training about workplace usage of prescription drugs must increase dramatically.

This 40,000 SCFM Regenerative Thermal Oxidizer was applied on a pharmaceutical application to destroy emissions from tray ovens, fluid bed dryers, and coating pans. (Anguil Environmental Systems photo)

Oxidizer Selection and Technology Options

As thermal oxidizer technologies have been applied to a wider range of industrial applications, new challenges are continually uncovered that test their efficacy and durability.

Making Sense of a Safety Data Sheet

According to OSHA, employers must ensure that Safety Data Sheets are readily accessible to employees for all hazardous chemicals in their workplace, and employees should have immediate access to the information without leaving their work area when needed, even during a power outage or other emergency.

Checking the Safety of Closed System Transfer Devices

The Nov. 7 meeting allows NIOSH personnel to give an update of new protocol developments.

3 E's For Steering Superior Safety

Enlist these three critical, interlocking "E's" in your own way and you’ll also achieve remarkable strides in Safety performance, communications, leadership, and culture.

Volvo Truck Recall Reaches 100 Percent Completion

The DOT announced nearly all of the 16,000 heavy trucks subject to recall have been accounted for.

Slip Resistance

To date no study has been performed that defines the safe threshold COF for a specific tribometer for all combinations of footwear, contaminant, and floor type.

Tight-fitting PAPRs not only offer significantly higher APF, but they use a less expensive qualitative fit test to achieve a higher level of efficiency for a lower cost. (Draeger Inc. photo)

Harnessing the Powered Air Purifying Respirator

Differentiating between contaminants that are gaseous or dust can be crucial in ensuring your PAPR is the proper PAPR.

Ever wonder why a forklift operator is wearing the same cut level of hand protection as the sheet metal operator? And even worse, their monthly usage is the same? (Ringers Gloves photo)

Selecting the Best Hand Protection for the Task

When the correct level of persistence is applied toward identifying the hazard exposures, true cost savings will be seen every time.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured

Artificial Intelligence