Four Companies Cited in Fatal Bridge Barrier Collapse

A Washington state family of three died when a 110-foot concrete section fell onto their car in April 2015.

The Washington State Department of Labor & Industries on Monday cited and fined four construction contractors for a demolition job gone wrong last April on the Bonney Lake bridge project. A 110-foot section of concrete barrier fell onto a car below, killing Josh and Vanessa Ellis and their eight-month-old son, Hudson, as it passed beneath the SR 410 overpass.

The general contractor for pedestrian improvements on the overpass, WHH Nisqually Federal Services, of Tacoma, had contracted with HighMark Concrete Contractors of Buckley to do the concrete work. HighMark Concrete in turn contracted with Staton Companies of Eugene, Ore., to remove part of the existing bridge, and Staton hired Hamilton Construction of Springfield, Ore., to cut the concrete barrier. All four companies had workers on site, according to L&I. "Demolition is one of the most hazardous operations in construction," said Anne Soiza, assistant director for the L&I Division of Occupational Safety & Health. "Preparing and following a specific safety plan that anticipates the worst case conditions is critical. Unfortunately, that didn't happen in this case."

The agency fined Staton $58,800 for one willful and two serious violations for exposing workers to hazards while demolishing the concrete barrier; Staton had not provided a demolition plan to its subcontractor, according to L&I's investigation, which found Staton had concerns about the possibility of the barrier falling down during cutting but continued with the work.

Hamilton Construction was fined $14,700 for three serious violations for exposing workers to essentially the same hazards, but the violations were not found to be willful. WHH Nisqually was fined $8,400 for two serious violations for not ensuring a workplace free from recognized hazards and for exposing workers on the lower level to the possibility of an unplanned collapse, and Highmark Concrete Contractors was fined $4,900 for one serious violation for not ensuring a workplace free from recognized hazards.

Product Showcase

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence