The booklet explains everything from respiratory hazard analysis to voluntary use. (Oregon OSHA illustration)

Oregon OSHA Posts Respiratory Program Guide for Small Businesses

Breathe Right! is a booklet that explains the process of selecting and maintaining a respiratory protection program, from hazard analysis to voluntary use.

A new publication titled Breathe Right! from Oregon OSHA is an easily understood guide to developing a respiratory protection program for owners and managers of small businesses. It covers Assigned Protection Factors and different types of respiratory hazards, fit tests, seal checks, respirator cleaning and disinfection, voluntary use, employee training, and respirator use by bearded workers.

It recommends that, after evaluating employees' exposures to each respiratory hazard, managers should then eliminate the hazards or lower employees' exposures to safe levels. "You can't just hand out respirators and expect employees to use them properly," it states. "If respirators are necessary to protect your employees, you must have a written program that describes how you will accomplish the following:

  • "Select appropriate respirators for employees.
  • Conduct medical evaluations for employees who use respirators.
  • Fit test employees who use tight-fitting respirators.
  • Ensure employees use respirators correctly during regular activities and during emergencies.
  • Ensure respirators are clean and properly maintained.
  • Ensure air quality in atmosphere-supplying respirators.
  • Train employees to protect themselves from respiratory hazards.
  • Evaluate your program's effectiveness."

The guides notes that an effective program ensures that employees are medically able to use respirators, that their respirators fit properly, and that they know how to use and care for them.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars