Back to the Basics: Safety Reminders that Go Beyond COVID-19 

Back to the Basics: Safety Reminders that Go Beyond COVID-19 

Workplace safety precautions set in place prior to the pandemic should not be forgotten about.

With the world’s gaze focused on protecting people against COVID-19 over the past two years, it may have been easy to lose sight of other foundational precautions and protocols that help keep workers safe. However, going back to the basics of workplace safety can ensure that employees adhere to mandatory safety standards and remain healthy on the job. Here are four fundamental safety areas that employers can focus on in addition to continuing to follow COVID-19 safety measures.

Get a Grip on Protecting Hands

Hands are among the most valuable and versatile of workers’ tools: they can fluctuate between threading delicate electrical wires to sawing through a thick steel pipe to shifting the lever on a construction vehicle. Yet, despite how often hands are used, hand safety and injury prevention can be overlooked by both employers and employees.

According to the U.S. Bureau of Labor Statistics (BLS), 121,000 employees sustained hand injuries that required them to take time off from work in 2019. Unsurprisingly, a major reason for employees sustaining hand injuries was not wearing proper PPE—70 percent of all workers who reported injuries did not use any form of hand protection, such as gloves, that could have prevented harm. In light of this, employers should encourage their workers to wear gloves that can properly protect their hands when working with materials, equipment or in an environment that could cause injuries. It is also a good idea to research and recommend styles and brands that meet safety standards to help employees make informed decisions.

Be Mindful of Head Safety Requirements

Over the past decade, the rate of work-related head injuries has increased greatly, from 61,200 annual cases in 2010 to 79,620 in 2019. Most of these occurrences, about 54 percent, are caused by contact with an object due to equipment operation, according to the National Safety Council. The rise of work-related head injuries is not only problematic numbers-wise, but because head injuries are usually among the most severe to workers physically. This makes treating them more costly to employers: the average workers’ compensation claim involving an injury to the head or central nervous system more than $92,000. Just as employees need proper protection for their hands, they also need to wear a hard hat, helmet or other form of head protection to ensure that they avoid contusions, concussions and other serious forms of head trauma while working. Remember that OSHA requires employers to ensure that:

*Employees wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects

*A protective helmet designed to reduce electrical shock hazard is worn by employees when near exposed electrical conductors which could contact the head

Conserve Workers’ Hearing

Some workplace hazards are not seen—they are heard. While most of us take our ability to hear for granted, employers who do so risk the safety and productivity of their workers. The National Institute for Occupational Safety and Health (NIOSH) reports that 22 million U.S. workers are exposed to damaging noise levels at work, accounting for an estimated $242 million in workers’ compensation payments each year. In addition to these economic impacts, employees with hearing loss often experience psychological impacts such as irritability, sleep disturbances, anxiety, depression, isolation and hostility, as well as diminished communication, concentration and job performance.

As if these reasons are not enough for employers to take action, hearing conservation is also an OSHA mandate. Employers are required to institute occupational noise and hearing conservation programs for employees who work in areas where the probable exposure to noise equals or exceeds an eight-hour time weighted average (TWA) sound level of 85 dB. For reference, talking at a normal volume is about 60 dB, city traffic is 85 dB and a rock concert or tractor generate about 100 to 115 dB.

Don’t Overlook Eye Protection

At number nine of the top ten most-cited OSHA violations in 2020 was inadequate eye and face PPE. According to NIOSH, every day in the U.S., about 2,000 workers sustain eye injuries that need medical treatment, despite the wide availability and relative low-cost of basic protective eye equipment. Any time a worker is exposed to chemical, environmental, radiological or mechanical irritants and hazards, they are required to wear an appropriate form of eye protection. To minimize the risk of workers’ injuries and prevent OSHA citations, employers should set clear expectations about the type of eye PPE workers should wear and when they should wear them.

Whether it is a pair of safety glasses, goggles or face shield on a work site, providing workers with a fitted, appropriate form of eye protection is imperative to prevent minor traumas, as well as serious injuries like blindness or eye amputation.

Encourage Proper Lifting Protocols

About one-fifth of work-related injuries involve the back, according to the National Safety Council, and of those incidents, about 28 percent involve overexertion in lifting or lowering objects. Reminding workers of how to properly lift heavy objects and when to use lifting devices, such as a dolly or cart, can help prevent these common incidents. As it turns out, prevention is key: The University of Southern California reports that once a back injury occurs, a worker is three to five times more likely to experience subsequent injuries.

Responsible lifting requires more than just good technique, though: it requires a safe, supportive environment. Employers should ensure that worksites are properly staffed in the event that an object requires two people to be moved, as well as maintain a clean environment free of potential hazards like wet or slippery floors, equipment and debris. While keeping workers safe is always top of mind for employers, focusing on common injuries that may be frequently overlooked can help ensure a safer, healthier workforce.

This article originally appeared in the September 2021 issue of Occupational Health & Safety.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

Featured

Artificial Intelligence

Webinars