Fall Hazards at Massachusetts Sites Net $308,500 in OSHA Fines

New Place Carpentry, a New Haven, Conn., contractor with a long history of fall protection violations, faces a total of $308,500 in new fines from the OSHA for willful and repeat fall hazards following the agency's inspections at worksites in Plymouth and Methuen, Mass.

The contractor, which primarily performs residential framing work, has been cited by OSHA eight times since July 2003. Fines from earlier investigations total $171,700 for failing to provide fall protection and other required safeguards for workers at jobsites in Connecticut, Massachusetts, and Rhode Island.

"The sizable fines proposed here reflect the gravity of these hazards and this employer's ongoing refusal to comply with basic, commonsense, and legally required protections for its workers," said Marthe Kent, OSHA's New England regional administrator. "Falls remain the number one killer in construction work. Employers who repeatedly fail to provide and ensure fall protection continue to place their workers' lives at needless risk."

Both of the latest inspections found workers engaged in residential construction work at heights greater than six feet without any form of fall protection. In addition, workers at the Plymouth site were working on unguarded, inadequately constructed and uninspected scaffolds, and were not trained to recognize scaffold hazards, while workers at the Methuen site were installing roof trusses without fall protection, lacked fall protection training, and accessed an upper work surface via a ladder that did not extend above the surface for required stability.

Additional hazards identified at the jobsites include gasoline-powered equipment left running while being refueled, power tools lowered to the ground by their cords, untrained fork truck operators, no fire extinguishers, debris with protruding nails in work areas, no hardhats where overhead hazards were present, and no eye protection for workers using nail guns.

All told, based on the recent inspections, New Place Carpentry has been issued one willful, six repeat and 13 serious citations. OSHA defines a willful violation as one committed with plain indifference to or intentional disregard for employee safety and health, while serious citations are issued when death or serious physical harm is likely to result from hazards about which the employer knew or should have known.

For more information, visit www.osha.gov.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence

Webinars