PPE


If multiple languages are spoken and especially if otehr languages are not well understood in a workplace, one must consider multilingual signage.

Arc Flash Label Best Practices

When deciding what information to include on your company labels, always remember for whom the labels are posted: the electrician or maintenance person in the field.

Brass Foundry Cited for 'Deliberate' Lead-Exposure Hazards

The citations allege, among other things, that the company did not take air samples as required for workers who were overexposed to airborne lead nor provide the required annual training associated with the hazards. An additional willful violation alleges that the company stopped providing hearing tests to employees overexposed to noise.

Airgas Signs Another Big University Deal

The Radnor, Pa.-based distributor of industrial gases and safety supplies announced the agreement with the University of Missouri on Wednesday.

Safety Sets Sail to San Diego

Top federal safety officials will discuss the Obama administration's OSH vision and how their agencies are implementing it. Many sessions focus on driver and transportation safety.

foot protection

Reality Based Foot Protection

"Employees forget, don't care, get uncomfortable, and take it off at break or lunch. My job is to keep them safe from themselves all day."

The only way to determine the attenuation level for a given subject is with a fit test system.

Fit Testing: Questions and Answers

Many users in a group may obtain values close to the labeled NRR, but a substantial portion typically do not. The only way to determine a person's attenuation level is with a fit test system.

A sound-level meter, as shown in this Casella USA photo, is a hand-held device that allows a competent third party to take measurements at the ear of a worker with the instrument pointing at the noise source.

The Use of Noise Dosimeters in the Workplace

Margin of error should be accounted for and the worst-case scenario measurement taken as the reading, particularly when close to an action level.

Explosion in Dumpster at Alloy Plant Leads to $44,000 Penalty

The violations include inadequate hearing and respiratory protection programs, electrical hazards, improper use of compressed air, as well as employee exposure to silica, lead, and manganese fumes.



Asphalt Paving Firm Penalized Following 'Willful' Tractor Incident

According to OSHA, an employee operating a tractor struck and hospitalized another worker who was digging a shallow ditch.

Postal Service Continues to Receive OSHA's Stamp of Disapproval

Citations against two USPS facilities in the past week are the latest in a string of penalties against other individual postal facilities nationwide, and follow DOL's filing in July of an enterprise-wide complaint that included 350 postal outposts.

Event Rental Co. Fined for Combustible Residues, Electrical Hazards, More

In addition to 18 serious citations, the company received four repeat citations, in part for failing to develop an energy control program, develop and implement a written hazard communication program, and train workers on chemical hazards in their work area.

Eliminating hazardous conditions on the high seas is one of the goals of NTSB.

NTSB to Host Fishing Vessel Safety Forum

"Creating a safer environment and eliminating hazardous conditions on the high seas is one of the goals of the NTSB," said Robert Sumwalt, NTSB board member. "The forum will provide a great opportunity to identify strategies to improve safety."

U.S. Adolescent Hearing Loss Jumps Significantly

Data from two nationally representative surveys indicates that the prevalence of hearing loss among U.S. adolescents increased by about 30 percent from 1988-1994 to 2005-2006, with 1 in 5 adolescents having hearing loss in 2005-2006, according to a study in the August 18 issue of JAMA.

Oil Spill Workers Not Being Properly Certificated; OSHA Responds

OSHA head Dr. David Michaels said employers are allegedly withholding written certificates attesting successful completion of HAZWOPER training to prevent workers from leaving their employ.

Hickory-Handled Sledgehammers Recalled

White Cap Construction Supply Inc. of Costa Mesa, Calif., voluntarily recalled the tools because the head can loosen and detach, posing an injury risk to users.

MSHA Releases Ventilation Guidelines for Coal Mines

MSHA decided to distribute this alert based on testimony delivered during a House Education and Labor Committee hearing in Beckley, W.Va., in May that raised serious questions as to whether or not the Upper Big Branch mine was properly following ventilation standards prior to the explosion on April 5.

Scott Health & Safety Receives 2-Million Hour Safety Award

The North Carolina Department of Labor presented it in recognition of that achievement at the company's Monroe, N.C., manufacturing facility.

Since Aug. 4 OSHA has issued penalties against three farmer-owned Cooperative Plus facilities in Wisconsin, including this one in Genoa City.

Violations at Two More Wis. Grain Sites Make Co-op’s Fines Top $1M This Month

At one of the sites, the farmer-owned company failed to test the atmosphere before entry and to have an employee entering wear a safety harness and lifeline. It also failed to post an employee to observe the entry. Both facilities failed to turn off and lock out power to the auger before workers entered the grain bins, investigators said.

Some Seek OSHA Health Care Infectious Disease Standard

The agency's May 2010 request for information attracted comments for and against a rulemaking that would address workers' protection against exposure to H1N1, TB, and other diseases.

Livestock Feed Manufacturer Cited for Anhydrous Ammonia Hazards

The 24 alleged serious violations that resulted from a site-specific targeting program investigation included a failure to have at least two suitable gas masks available and accessible; lack of developed confined space procedures; and grinding wheel, compressed air, and electrical shock hazards.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence

Webinars