PPE


A metal shop worker is using the 3M Versaflo Respirator System, which combines respiratory, head, eye and face, and hearing protection.

PAPRs and SARs for the World

Loose-fitting powered and supplied-air respirators offer increased comfort and productivity -- a better experience for all concerned.

Integrate your plans to include cold stress factors. Assign responsibility for monitoring the weather, process changes, or movement of personnel.

Not Cool . . . Brrrrrrr, It's Cold!

Your employees need special support in cold situations and more yet in emergency cold situations.

The grandfather clause that currently allows for 36-inch guardrail has been specifically excluded. (LJB Inc. photo)

OSHA Focuses on Fall Protection Regulations

A long-awaited modernization of the general industry regulations has good elements, as well as some bad features and some omissions.

The opposition to the proposed change in interpreting "feasible" engineering controls for noise is reminiscent of the opposition to OSHA when it was created.

National Academy of Engineering Report Urges 85 dB PEL

OSHA has long used the 90 dB Permissible Exposure Limit to define maximum "safe" noise, although much of the rest of the world disagrees.

Worker's Fatal Electrocution Leads to $119,700 Fine for Landscaping Firm

OSHA initiated an investigation April 21 when a worker made contact with a high-voltage power line while tree cutting. As a result of the investigation, the company was cited for two willful, seven serious, and three other-than-serious violations.

Gun Powder Manufacturer Fined $1.2 Million Following Deadly Explosion

"Even after a prior incident in which a worker was seriously injured, and multiple warnings from its business partners and a former employee, this employer still decided against implementing safety measures," said Assistant Secretary of Labor for OSHA Dr. David Michaels.

NIOSH Evaluates Health Effects of BP Oil Spill Response Workers

An occupational health concern common among all Deepwater Horizon response workers was heat stress from work in a hot and humid environment.

Ohio Construction Company Cited $57,600 for Fall Protection Violations

"Falling is the great safety hazard for workers on roofing projects, and B.O.S.S. Construction has demonstrated a pattern of disregard for its workers' safety by failing to ensure fall protection is in place on jobsites," said OSHA Area Director Jule Hovi.



DuPont Sponsoring Gallery at Law Enforcement Museum

The maker of Kevlar announced Oct. 18 that it will sponsor a changing exhibition gallery at the museum in the 400 block of E Street NW in Washington, D.C.

Noise Suppression Technologies, Inc. of Columbus, Ohio (www.noisesuppression.com) makes these Quilted Curtain Composites, which are used as enclosures to contain and absorb noise.

OSHA Shifts on Noise Exposure Standards

It is reversing the enforcement policy it has used since 1983, which allows most employers to use PPE and a hearing conservation program rather than engineering and administrative controls.

California Emphasis Program Confirms Refineries in Good Shape

An examination of 11 refineries by Cal/OSHA's Process Safety Management Unit found they are properly managing the risks that caused the April 2010 explosion at the Tesoro refinery in Anacortes, Wash., in which seven workers died.

Papers Due Nov. 1 for 2011 Hazmat Response Teams Conference

The deadline in IAFC's call for presentations is 11:59 p.m. EST on Nov. 1. The conference takes place May 18-22 in Baltimore.

New Products Steal the Show

At this year’s Congress & Expo in San Diego, companies put their newest products on display at eye-catching booths.

DOE Withholds $3 Million from Contractor for Safety Violations

The Oct. 7 letter from the Office of Health, Safety and Security's acting enforcement chief to Savannah River Nuclear Solutions, LLC said SRNS "had extensive deficiencies" in hazard assessment and its electrical safety program.

Company Fined $188,500 for Exposing Workers to Lead, More

"Simsmetal East knowingly put its workers at risk by failing to protect them from overexposure to lead, which can cause brain damage, paralysis, kidney disease, and even death," said Kris Hoffman, director of OSHA's Parsippany Area Office in New Jersey.

OSHA Interpretations Flowing Again

The latest two are dated Sept. 30 and Oct. 1. Both concern interpretations of construction standards.

MSHA's Fight with Massey Energy Continues

The federal agency issued 11 closure orders during a Sept. 28 surprise inspection at a West Virginia coal mine owned by the company. All 11 hazards have been abated.

Worker's Death at Paper Mill in Niagara Falls Leads to $75K in Fines

The worker was crushed when he became caught between a fixed metal barrier and a large paper roll that was moving on a conveyor. OSHA identified other hazardous conditions that were not related to the fatality; those resulted in two repeat and two serious citations.

Image of Honeywell President Mark Levy

Honeywell Keeping Sperian a Separate Division

Mark Levy, president of the Honeywell Life Safety business, says the acquisition completed Sept. 15 positions its 17,000 worldwide employees well for a global market where safety standards are quickly rising.

A Whole New World

For nearly five years working at 1105 Media, my bread and butter was the security industry, but with my new promotion to Web managing editor comes new opportunities to learn a whole new market, namely occupational health and safety.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence