PPE


Covering cargo trailers and rail cars, the training will include ammonia properties and emergency response and first aid for releases.

Nationwide Anhydrous Ammonia Training Tour Starts Feb. 15

Several organizations are working with TRANSCAER, the voluntary national program helping responders and communities prepare for hazmat transportation incidents, as it begins a yearlong training effort in Stockton, Calif.

MSHA, Partner Bring Training Toolbox to Aggregates Industry

Bidding to help more than 9,600 sand, gravel, and crushed stone mines in the United States, Puerto Rico, and the Virgin Islands, “Safety Pro in a Box” includes modules on various hazards.

U.S. Rep. Darrell Issa, chairman of the House Oversight & Government Reform Committee

Issa Asked to Help Stop I2P2 and Noise Proposals

The letter sent to about 150 trade associations last month by U.S. Rep. Darrell Issa, new chairman of the House Oversight and Government Reform Committee, asking them to identify "burdensome" regulations, has put these two OSHA proposals on the hot seat. President Obama's new executive order puts additional pressure on existing regulations.

OSHA Issues $229,000 in Fines in Double Fatality

The two victims were welding to repair a leaking tank last July when it exploded, according to OSHA.

2011 is the centennial year for ASSE, and the association plans a big celebration at its conference.

ASSE's 'Century of Safety' Film Debuts

Beginning with the Triangle Shirtwaist fire in New York City, the 21-minute film "tells the story of how and why we are safer at work today" and how the occupational safety, health, and environmental profession developed.

OSHA Fines Postal Service for Electrical Hazards at Mass. Mail Facility

The Postal Service faces $238,000 in fines, mainly for exposing workers to electrical hazards.

The National Conversation on Public Health and Chemical Exposures aims to create an agenda for implementing stronger protections.

Still Time to Register for National Conversation

Time's running out to register and take part in the National Conversation on Public Health and Chemical Exposures, a two-day web forum presented by ATSDR that will take place Jan. 5-6.

Illinois Contractor Cited $360,000 for Trenching Hazards, Repeat Violations

OSHA issued willful citations alleging that Gerardi failed to properly protect workers from trench cave-ins, the result of four separate inspections conducted under the OSHA Trenching and Excavation Special Emphasis Program.



Carbon nanotubes have been found to quickly cause adverse lung health effects in mice.

NIOSH Sets Meeting on Carbon Nanotubes Bulletin

The agency has finished a draft Current Intelligence Bulletin containing an assessment of the toxicological data and recommendations for safe handling of the materials.

Snowblowers Cause Hundreds of Finger Amputations Each Winter

It's the peak season for snowstorms, and snowblowers are working overtime. But Loyola University Health System hand surgeon Dr. Randy Bindra cautions that snowblowers can cause severe hand injuries, including loss of fingers that can require one or more surgeries and months of rehabilitation.

Putting the Lid on Chemical Burns

Knowledge and protection can prevent serious hand injuries.

Noise Control: How to Plan for OSHA's New Interpretation

Designing to achieve the desired reduction in noise without excessive capital cost and negative operational impact is often a delicate balance.

OSHA Piles Up Fall Protection Citations

Several enforcement actions been filed this month, including one against a Houston contractor in connection with a job site in Hamburg, Pa.

SAFEX International, based in Switzerland, has 110 members in 46 countries.

SAFEX International Developing Explosives Management Course

The Swiss organization's latest newsletter explains that development of the course is far along. Key issues to be covered have been determined, and the preliminary outline calls for eight modules.

Late 2011 Action Set for Construction Confined Spaces Rule

Semiannual agendas published Monday in the Federal Register are later than usual. Those from the Labor Department's units are sparse.

Saying fewer workers will be affected than some opponents may realize, NHCA noted the noise control requirement is triggered only when workers have eight-hour average exposures over 90 dBA.

NHCA Defends OSHA's Noise Exposure Change

The new enforcement policy is not yet in effect, but some groups are attacking it as an expensive, unnecessary change. The National Hearing Conservation Association supports it, however.

Using safeguarding equipment, such as light curtains, safety relays, and cable pull switches, helps to reduce risk to employees.

Improving Your Machine Safety Program

Shift the focus from avoiding negative outcomes to achieving positive results.

Honeywell Giving 2011 Outlook Tomorrow

The early signs on Dec. 10 were promising: The company raised its dividend by 10 percent.

The authors tested how well various types of ventilation worked at capturing the dust produced by methods currently used for manual concrete surface grinding.

Study Says More Protection Needed for Manual Concrete Grinding

Evaluating the equipment, engineering controls, and grinding methods currently used for manual concrete surface grinding, a study published in JOEH says current methods to control dust aren't sufficiently protective.

Comment Period Under Way for Australia's Model Regs

The deadline to comment on the 582-page document is April 4, 2011, and government safety agencies are urging employers and workers to participate as Australia moves toward harmonized regulations.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence