Illinois Contractor Cited $360,000 for Trenching Hazards, Repeat Violations

OSHA issued willful citations alleging that Gerardi failed to properly protect workers from trench cave-ins, the result of four separate inspections conducted under the OSHA Trenching and Excavation Special Emphasis Program.

OSHA has issued Gerardi Sewer & Water Co. in Norridge, Ill., eight willful, two serious, and three repeat safety citations for failing to protect workers from cave-ins during trenching operations. The citations arose from work the company performed in the Illinois villages of Elmhurst, Park Ridge, Oak Lawn, and Des Plaines. Gerardi faces proposed penalties of $360,000.

"Cave-ins are a leading cause of worker fatalities during excavations," said Assistant Secretary of Labor for OSHA Dr. David Michaels. "At each of these four jobsites, Gerardi's president and foreman were present and still failed to protect their workers despite their knowledge of required safety procedures. This situation demonstrates a systemic problem with the way this company approaches safety and demonstrates an egregious disregard for workers' lives."

OSHA issued willful citations alleging that Gerardi failed to properly protect workers from trench cave-ins, the result of four separate inspections conducted under the OSHA Trenching and Excavation Special Emphasis Program. The inspections occurred June 25 in Elmhurst, July 28 in Park Ridge, Sept. 21 in Oak Lawn, and Nov. 17 in Des Plaines. A willful violation is one committed with intentional knowing or voluntary disregard for the law's requirements or with plain indifference to worker safety and health.

OSHA standards mandate that all excavations 5 feet or deeper be protected against collapse. Employees were found to be working at varying depths from 5.9 to 8 feet without cave-in protection during the inspections. Detailed information on trenching and excavation hazards is available on OSHA's website at http://www.osha.gov/SLTC/trenchingexcavation/index.html.

"OSHA implemented a Trenching and Excavation Special Emphasis Program in the 1980s, so the industry is well aware of the safety regulations for trenching operations," said OSHA Area Director Kathy Webb in North Aurora, Ill. "Gerardi Sewer & Water has been inspected and cited by OSHA numerous times. There is no excuse for noncompliance at its jobsites."

Gerardi Sewer & Water Co. was issued repeat citations alleging that employees failed to wear hard hats and high-visibility vests at the Elmhurst site, and that Gerardi failed to provide a safe means of access and egress for employees working in an excavation site in Des Plaines. A repeat citation is issued when an employer previously has been cited for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years.

The company was issued serious citations for allegedly failing to ensure that water accumulations were removed from a trench at both the Elmhurst and Des Plaines sites. A serious citation is issued when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

This case meets the criteria for OSHA's Severe Violators Enforcement Program. Initiated in the spring of 2010, SVEP is intended to focus on recalcitrant employers who endanger workers by committing willful, repeat or failure-to-abate violations. For more information on SVEP, go to http://www.osha.gov/dep/svep-directive.pdf*.

Prior to the four inspections detailed above, Gerardi Sewer and Water Co. had been inspected by OSHA eight times since 1987, resulting in 15 prior citations.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence