PPE


Repeat, Fall Hazards Add Up to $125,818 Fine for Aluminum Finishing Firm

This company has disregarded the safety of its employees and repeatedly allowed them to be exposed to struck-by hazards from structural failure, electrocution hazards and falls," said Robert Vazzi, OSHA's area director in Savannah.

N.Y. Apartment Complex Cited for Exposing Workers to Raw Sewage, Asbestos

"Our inspections found maintenance workers exposed to a variety of health and safety hazards while performing their duties, including stripping paint, removing drywall, and clearing basements of raw sewage that had backed up during heavy rains," said Kay Gee, OSHA's Manhattan area director.

Orange and white, the colors of the "Experience Is Not Enough" campaign, were displayed last week in the lighting of the Empire State Building.

Fall Protection Campaign Targets NYC's Leading Accidents Cause

New York City's buildings commissioner, Robert LiMandri, announced the citywide campaign's launch last week to emphasize the need to use fall harnesses, guardrails, and netting.

Voluntary Use of Respirators: A Plain-Language Look at OSHA Requirements

OSHA encourages employees to use NIOSH-approved respirators for voluntary use, but this is not specifically required.

Why FR Clothing?

Learn whether FR is right for your company and, if so, how to comply with industry standards.

Northwest Convergence

Innovation, integration, inspiration--and wood dust--will be in the spotlight this month at the 72nd American Industrial Hygiene Conference & Exposition.

TSCA Regulations: Today's Challenges and Tomorrow's Reforms

Now is the time to digest the full complement of new rules, evaluate the impact to organizational reporting, determine whether gaps exist in expertise or capabilities, and understand what options exist to fill those gaps.

Workers employ safe behaviors every time, not just when there is an incentive or threat of punishment.

Keep An Eye on Construction Safety

Construction falls and trench collapses might occur at any time during the year, but they typically peak during the summer.



OSHA Nails Georgia Sheet Metal Firm Following Fatal Crushing

OSHA began an inspection in October 2010 after an employee died when he was crushed by a large steel frame weighing approximately 1,550 pounds. Proposed penalties total $127,200.

The petition claims that a warning on packaging of powdered latex gloves "is grossly inadequate."

Public Citizen Seeks US Ban of Latex Surgical, Exam Gloves

The organization submitted a similar petition that FDA denied in 1999, but Public Citizen says the reasons cited for the denial are no longer valid and many glove manufacturers support a ban.

DOJ Developing Protective Helmet Standard

It may cover both ballistic and riot protection, according to the published request for committee members from certification bodies and testing labs.

Pie Maker Minces Fingertip, Bakery Fined $229,400

Violations include exposing workers to combustible dust, fall and electrical hazards, among others.

Trench Collapse Leads to $63,360 Fine for Ohio Company

An OSHA inspector was performing a work site inspection when he directed an employee to exit the trench, believing collapse was imminent. Within five minutes the trench collapsed and could have buried the worker under 6 to 7 feet of soil.

OSHA Issues New Injury Prevention Sheet on Shipyard Rigging

Loads that are improperly rigged can expose workers to hazards including falls, electric shock, amputation, and being crushed by objects.

Cheese Maker Hit with $111,000 Fine for Anhydrous Ammonia Hazards, More

OSHA cited the company for 12 serious and one repeat violation after an inspection identified two incidents of anhydrous ammonia release, an absence of fall protection, the employer's failure to implement an emergency response plan, and other workplace hazards.

Leather Finisher Fined $105,300 Following Worker's Hand Injury

"This case is a stark example of the devastating consequences to workers when adequate machine guarding is absent," said Edward Jerome, OSHA's area director in Albany.

Arkansas Aluminum Firm Fined $154,000 for Repeat, Health Violations

The safety inspection found 10 serious and five repeat safety violations. A health investigation yielding nine serious violations was opened Nov. 15, 2010, based on a referral from the safety inspection.

OSHA Hammers Lowe's for Electrical, PPE Violations

OSHA proposed $82,700 in penalties for the violations following its inspection, which was conducted based on high injury and illness rates reported at the site.

Washington Passes Bill Regulating Handling of Hazardous Drugs

Without precautions being taken, such as proper ventilation or protective equipment, the preparation, administration, and the disposal of these drugs exposes hundreds of thousands of workers to potentially harmful levels of the chemicals involved.

FDA Clears Single-Use Antibacterial N95 Surgical Respirator

The Food and Drug Administration cleared the SpectraShield 9500 N95 surgical respirator, a device that kills 99.99 percent of three different kinds of bacteria when exposed to its outer surface. The single-use, N95 surgical respirator is designed for use in health care settings by health care personnel to protect against microorganisms, body fluids, and particulate material.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence