PPE


Repeat, Fall Hazards Add Up to $125,818 Fine for Aluminum Finishing Firm

This company has disregarded the safety of its employees and repeatedly allowed them to be exposed to struck-by hazards from structural failure, electrocution hazards and falls," said Robert Vazzi, OSHA's area director in Savannah.

N.Y. Apartment Complex Cited for Exposing Workers to Raw Sewage, Asbestos

"Our inspections found maintenance workers exposed to a variety of health and safety hazards while performing their duties, including stripping paint, removing drywall, and clearing basements of raw sewage that had backed up during heavy rains," said Kay Gee, OSHA's Manhattan area director.

Orange and white, the colors of the "Experience Is Not Enough" campaign, were displayed last week in the lighting of the Empire State Building.

Fall Protection Campaign Targets NYC's Leading Accidents Cause

New York City's buildings commissioner, Robert LiMandri, announced the citywide campaign's launch last week to emphasize the need to use fall harnesses, guardrails, and netting.

Voluntary Use of Respirators: A Plain-Language Look at OSHA Requirements

OSHA encourages employees to use NIOSH-approved respirators for voluntary use, but this is not specifically required.

Why FR Clothing?

Learn whether FR is right for your company and, if so, how to comply with industry standards.

Northwest Convergence

Innovation, integration, inspiration--and wood dust--will be in the spotlight this month at the 72nd American Industrial Hygiene Conference & Exposition.

TSCA Regulations: Today's Challenges and Tomorrow's Reforms

Now is the time to digest the full complement of new rules, evaluate the impact to organizational reporting, determine whether gaps exist in expertise or capabilities, and understand what options exist to fill those gaps.

Workers employ safe behaviors every time, not just when there is an incentive or threat of punishment.

Keep An Eye on Construction Safety

Construction falls and trench collapses might occur at any time during the year, but they typically peak during the summer.



OSHA Nails Georgia Sheet Metal Firm Following Fatal Crushing

OSHA began an inspection in October 2010 after an employee died when he was crushed by a large steel frame weighing approximately 1,550 pounds. Proposed penalties total $127,200.

The petition claims that a warning on packaging of powdered latex gloves "is grossly inadequate."

Public Citizen Seeks US Ban of Latex Surgical, Exam Gloves

The organization submitted a similar petition that FDA denied in 1999, but Public Citizen says the reasons cited for the denial are no longer valid and many glove manufacturers support a ban.

DOJ Developing Protective Helmet Standard

It may cover both ballistic and riot protection, according to the published request for committee members from certification bodies and testing labs.

Pie Maker Minces Fingertip, Bakery Fined $229,400

Violations include exposing workers to combustible dust, fall and electrical hazards, among others.

Trench Collapse Leads to $63,360 Fine for Ohio Company

An OSHA inspector was performing a work site inspection when he directed an employee to exit the trench, believing collapse was imminent. Within five minutes the trench collapsed and could have buried the worker under 6 to 7 feet of soil.

OSHA Issues New Injury Prevention Sheet on Shipyard Rigging

Loads that are improperly rigged can expose workers to hazards including falls, electric shock, amputation, and being crushed by objects.

Cheese Maker Hit with $111,000 Fine for Anhydrous Ammonia Hazards, More

OSHA cited the company for 12 serious and one repeat violation after an inspection identified two incidents of anhydrous ammonia release, an absence of fall protection, the employer's failure to implement an emergency response plan, and other workplace hazards.

Leather Finisher Fined $105,300 Following Worker's Hand Injury

"This case is a stark example of the devastating consequences to workers when adequate machine guarding is absent," said Edward Jerome, OSHA's area director in Albany.

Arkansas Aluminum Firm Fined $154,000 for Repeat, Health Violations

The safety inspection found 10 serious and five repeat safety violations. A health investigation yielding nine serious violations was opened Nov. 15, 2010, based on a referral from the safety inspection.

OSHA Hammers Lowe's for Electrical, PPE Violations

OSHA proposed $82,700 in penalties for the violations following its inspection, which was conducted based on high injury and illness rates reported at the site.

Washington Passes Bill Regulating Handling of Hazardous Drugs

Without precautions being taken, such as proper ventilation or protective equipment, the preparation, administration, and the disposal of these drugs exposes hundreds of thousands of workers to potentially harmful levels of the chemicals involved.

FDA Clears Single-Use Antibacterial N95 Surgical Respirator

The Food and Drug Administration cleared the SpectraShield 9500 N95 surgical respirator, a device that kills 99.99 percent of three different kinds of bacteria when exposed to its outer surface. The single-use, N95 surgical respirator is designed for use in health care settings by health care personnel to protect against microorganisms, body fluids, and particulate material.

Product Showcase

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence