PPE


NIOSH Fact Sheet Highlights Safety, Health Concerns Among Hotel Cleaners

Nearly 1.8 million people worked in the traveler/accommodations industry in 2008, including more than 400,000 hotel room cleaners.

Manufacturer Fined $169,500 Following Worker's Fatal Electrocution

Two serious violations related to the fatality include not requiring employees to use work safety practices when dealing with live electrical circuits, and failing to use locks and tags when de-energizing test equipment.

NIOSH Director Dr. John Howard

NORA Symposium's Plenary Sessions Being Broadcast Live

They can be viewed beginning at 8:30 a.m. EDT both July 12 and July 13. Taking place in Cincinnati, the 7th Symposium will showcase excellence in OSH research and how it may be applied to prevent injuries and illnesses.

Metal Stamping Plant Faces $426,100 in Fines for Failing to Report Amputations

Two employees received injuries while operating mechanical power presses in the plant prior to OSHA's January inspection. As a result, the company was cited for a total of nine willful safety violations.

The tasks an OSHA standard would address might or might not be direct patient care, and examples include conducting autopsies and medical waste disposal.

Two OSHA Meetings to Discuss Infectious Agents Standard

The July 29 meetings in Washington, D.C., will give a small number of stakeholders the opportunity to discuss what should be included in a standard controlling workers' exposures during tasks such as housekeeping, medical waste disposal, repairing medical equipment, and conducting autopsies.

The types of fall arrest systems used within your organization can impact the rescue equipment needed. (LJB Inc. photo)

The Most Overlooked Aspect of Fall Protection

Employers should understand that by choosing a fall arrest system, they are obligating themselves to develop a rescue plan and corresponding rescue training.

A house in Snow Hill, N.C. lay in ruins after a tornado April 16. (Photo: David Fine/FEMA)

After the Tornadoes

The safety training you do today has a very long lifespan.

The enclosed-toe, all-rubber safety overshoe is a high-quality alternative to expensive safety footwear. (U.S. Safety photo)

Steel-Toed Assist

Revolutionary rubber safety overshoes. Try saying that fast three times.



Slew of Safety Hazards Add Up to $72,000 in Fines for Arizona Firm

Seventeen serious violations include the company's failure to ensure exits were unblocked, provide eye protection approved by the American National Standards Institute, and provide written energy source lockout/tagout procedures.

WISHA Issues Summer Safety Work Tips

Those working outdoors may have to cope with warm weather, workers who drive for their jobs may need to watch for an increasing number of pedestrians, and amusement parks must ensure workers are safe when erecting new rides or operating and maintaining rides.

Mattress Maker Hit with $45,850 in Fines for Electrical Hazards

Electrical hazards include a damaged flexible metal conduit, electrical panel boxes with unclosed openings, an electrical box with a missing blank, and an electrical conduit that was crushed and pulled apart.

Fall, Struck-By Hazards Add Up to $155,800 in Fines for Roofing Firm

In December 2010, OSHA began its inspection at the Cumberland Mall in Atlanta after Peach State Roofing employees were observed exposed to a fall hazard while working along the edge of a flat roof.

Can Denver's Safety 2012 Measure Up?

Industrial hygienists saw the Mile High City's expanded convention center last year. It is the site of ASSE's annual conference next June.

ASSE's Safety 2011 Thrives in Windy City

With more than 500 exhibitors on hand, all simultaneously vying for attention -- and with a recordbreaking number of attendees on the receiving end of that vying -- this year's show was especially bustling. Here are just a few of the sights, sounds, and goods that grabbed our attention.

This photo shows the Aquatics Centre under construction.

London 2012's 'Big Build' Nearly Done

Construction of venues is ahead of schedule, and the accident rate is below the construction industry norm, according to Stephen Williams, HSE director for the 2012 games.

Fire department needs have declined the most in the areas of PPE and firefighting equipment, according to the third NFPA assessment.

Fire Service Grants' Impact Measured

NFPA's latest needs assessment found equipment and training shortages remain, but in fewer departments, because of the Assistance to Firefighters Grant programs.

Lighting Expert Receives 2011 John Jenkins Award

CSA Standards has recognized Alex Milne for his work on lighting standards, electrical safety standards, and the Canadian Electrical Code Parts I and II.

W.Va. Firm Fined $154,000 Following Deaths of Three Workers in Explosion

"This tragedy could have been prevented," said Assistant Secretary of Labor for OSHA Dr. David Michaels. "It is imperative that employers take steps to eliminate hazards and provide a safe working environment."

This ballistic body armor is Galls by Point Blank SE Body Armor Threat Level IIIA.

Workshops Announced on Helmet, Body Armor Standards

The standards that are being revised cover two types of protective equipment for law enforcement.

Chicago ran short of hotel rooms as the ASSE Safety 2011 expo opened on June 12.

Safety 2011: Chicago Runs Short of Hotel Rooms

Record attendance at the ASSE conference and expo coincided with several events in Chicago to make hotel rooms scarce in the Second City.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars