PPE


Laceration, Fire Hazards Add Up to $49,210 in Fines for N.Y. Manufacturer

Eight serious violations involve a storage cabinet for flammable liquids that did not meet fire resistance requirements, an auger that did not have its power source locked out to prevent its activation while employees cleared jams, and blocked and unmounted fire extinguishers.

Worker Fatally Crushed on Oil Rig, Firm Fined $132,300

OSHA's Baton Rouge Area Office began its inspection March 10 following a report that an employee was fatally injured when a land-based portable rig, which was mounted on a barge, tipped over and crushed the employee to death.

Presentations Highlight FRI 2011 Program

This year's Fire-Rescue International conference put on by the International Association of Fire Chiefs gets rolling Aug. 26 at Atlanta's Georgia World Congress Center.

OSHA Tosses Salad Maker $51,000 in Penalties for Repeat Violations

Two repeat violations with penalties of $30,000 involve to the company's failure to ensure workers were wearing safety glasses and ensure the proper level of compressed air was used for cleaning food particles.

Sensear's Growth Continues

Five years after the company was founded, it has landed a deal with the U.S. Marine Corps that opens more opportunities with the U.S. military, CEO Justin Miller says.

Upcoming OH&S Virtual Event Approved for CM Points

ABIH has approved the Aug. 31 event for 0.67 Industrial Hygiene Certification Maintenance (CM) points.

Grainger Buying Dutch MRO Supplier

The $344 million acquisition is subject to customary closing conditions and expected to be completed in the third quarter of 2011.

NYC Set to Host 2011 World & Police Fire Games

About 50 events reached their maximum number of competitors and have been closed. Schedules for the events will be posted Aug. 15, and the games take place Aug. 26 through Sept. 5.



NIOSH List Highlights Safe Handling of Hazardous Drugs

When hazardous drugs must be prepared and administered, there are workplace best practices that can minimize potentially harmful exposure. These include the use of engineering controls and personal protective equipment.

OSHA Brews Up $46,550 in Fines for Georgia Coffee, Tea Manufacturer

Fourteen serious violations involve the company's failure to install isolation devices on the dust collector system to prevent fires and explosions, keep steel beams and floors free of coffee and tea dust accumulation, and develop and implement an emergency action plan and training in the use of fire extinguishers.

$65 Million Goal for House Research Institute Campaign

Several large gifts already have been made to assist the institute and the 65 Faces Campaign marking its 65th anniversary.

Texas Battery Recycling Facility Cited for Exposing Workers to Lead

The serious violation was cited for failing to ensure that employees who worked more than eight hours during a workday were not exposed to lead at concentrations greater than the reduced permissible exposure limit.

$326,300 in Fines Issued to Colorado Dairy, Contractor

"The violations which related to improper management of the anhydrous ammonia system demonstrate a lax attitude towards a potentially catastrophic atmospheric release," said John Healy, OSHA area director in Englewood.

PROSAFE to Examine Ladders, Laser Pointers

The 2010 Joint Action involves market surveillance of five new product categories in 21 European countries.

Final Directives Issued for Wind Turbines in National Forests

They add a new "Wind Energy Uses" chapter to the Forest Service's Special Uses Handbook and a new "Monitoring at Wind Energy Sites" chapter to the Wildlife Monitoring Handbook.

OSHA Notifies U.S. Army of Multiple Hazards at Fort Bragg

A total of 37 violations are alleged, including two repeat violations involving machine guarding. OSHA said its Frankfort, Ky., office notified the Army earlier about those same violations at a Kentucky installation.

Contractor Zapped with Penalty Following Fatal Electrocution

The violations involve failing to instruct workers in the recognition and avoidance of unsafe conditions, ensure the use of personal protective equipment, and protect workers from electrical shock.

Michaels, Haynes Speaking at VPPPA's Annual Conference

The conference begins Aug. 28 at the Ernest N. Morial Convention Center in New Orleans, with OSHA's Dr. David Michaels and Capt. Al Haynes, made famous by the successful crash landing of United Airlines Flight 232 on July 19, 1989.

Petzl Belaying Products Recalled in Europe

The GRIGRI 2 belaying device, which has an assisted brake for climbing ropes of 8.9 to 11 mm, has been recalled. Excessive force exerted on the handle when it is fully open may cause it to stick in the open position, disabling the braking action.

Contractor Fined $162,000 after Worker Dies from Overexposure to Methylene Chloride

Stockbridge, Ga.-based Creative Multicare Inc. was issued five serious, two willful, and one other-than-serious violation following the death of a worker who was exposed to excessive amounts of methylene chloride while using the chemical to remove paint from a bathtub surface.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars