PPE


Words of Wisdom

When a safety manager explains what PPE he or she is recommending and why, that should be persuasive, says orthopedic surgeon Dr. Gregory C. Berlet, who sees the damage a severe crush injury leaves behind.

OSHA to Take-Out Container Maker: Time for Hazards 'To Go'

Eighteen serious violations include failing to maintain emergency lighting in the warehouse, provide employees exposed to noise hazards with proper training and monitoring, provide written operating procedures for the foam extrusion system.

Horn, Percussion Orchestral Players at Highest NIHL Risk

A study published in the International Journal of Occupational Safety and Ergonomics measured sound pressure levels as four orchestras performed, then estimated the risk of hearing loss for someone exposed over 40 years of employment.

USFA Releases Annual Report on Firefighter Fatalities in U.S.

Eighty-seven on-duty firefighters from 31 states lost their lives as the result of 83 fatal incidents that occurred in 2010.

$949,800 in Fines Issued to Trailer Maker for Toxic Fumes, Noise Hazards

OSHA's Dallas Area Office initiated a safety and health inspection at the company's facility in Texas following receipt of a complaint that employees were not adequately protected from being injured by rotating machinery parts, and employees were exposed to toxic welding fumes while fabricating trailers and noise levels above approved health standards.

Singapore Workplace Fatalities Rise in First Half of 2011

The report highlighted that the number of occupational diseases went up from 124 in 2010 to 361 in 2011, primarily due to the increased reporting of noise-induced deafness cases.

Georgia Lumber Firm Nailed for Chain Saw, Machine Guarding Hazards

Charles Greer Lumber Co. has been cited by OSHA for 18 safety and health violations following an April inspection of the company's plant in Suwanee, Ga. Penalties total $87,780.

Londoners Watch Firefighters Compete

The host London Fire Brigade invited the general public to watch the largest UK firefighter competition of the year and to learn about keeping themselves and others safe from fires.



DOL Sues Dentist for Firing Worker who Complained about Needlestick Hazards

According to the complaint, the employer discharged a dental assistant who raised concerns about an office procedure that required workers to remove protective caps from contaminated needles before putting the needles in disposal containers for sharps.

Cintas Names Top Four Restaurant Injuries

By implementing a first aid program developed with the specific challenges and injuries of a foodservice operation in mind, restaurants can help protect their workers and reduce exposure.

OSHA, NIOSH Release Nail Gun Safety Guide

It says injury prevention is possible if contractors take steps such as using full sequential trigger nail guns, establishing nail gun work procedures, and providing workers with personal protective equipment.

A+A 2011 On Record Pace

A record 1,580 exhibitors have booked 617,800 square feet of exhibit space for the Oct. 18-21 trade show and the Congress for Safety and Health at Work.

Concussions Researcher Wins 'Genius Grant'

Among 22 winners of $500,000, no-strings-attached awards announced Sept. 20 by the John D. and Catherine T. MacArthur Foundation was Kevin Guskiewicz, who has focused his research on sports-related concussions.

October Especially Cruel to Metal, Nonmetal Mines

A Fatal Alert posted by MSHA says this category of mines has experienced more fatalities in October than in any other month during the past 11 years.

ASSE Announces New Prevention-Through-Design Standard

The Z590.3 standard focuses specifically on the avoidance, elimination, reduction, and control of occupational safety and health hazards and risks in the design and redesign process.

Many Iraq/Afghanistan War Veterans Need Lung Function Testing: ACOEM

The researchers suggest a number of possible explanations for lung injury in soldiers with IAW-LI, such as inhaling sharp and coarse dust grains, toxins, and allergens in the in the harsh, polluted combat environment.

CDC Tracking Growth in Chemical Suicides

An ATSDR analysis identified 10 incidents during 2006-2010 in six states. Nine people died and four law enforcement officers -- none of whom was wearing PPE when exposed -- were injured.

Party Rental Firm Fined $154,000 for Plethora of Safety Violations

Two willful violations involve failing to train employees in the use of powered industrial trucks and causing a potential electrocution hazard by providing damaged extension cord sets to be used in wet locations without ground fault circuit interruption protection.

MSA Appoints New Global Product Leader

Dr. Thomas Muschter most recently was R&D director for MSA's International business segment. He repleaces Ronald N. Herring, who on Nov. 1 will assume the role of president of MSA International, Western Europe Zone and Middle Eurasia Zone.

NFPA Cites Safety Improvements Rising from 9/11

Communications and interoperability for emergency responders, high-rise building safety, and emergency preparedness have improved as "a direct outgrowth of 9/11, and each is central to that event's legacy of safety," NFPA Journal Staff Writer Fred Durso Jr. reports.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence