PPE


Revised Z359 Takes Shape

THE revised ANSI Z359.1 standard coming out this year is not meant to be the last word on fall protection programs and equipment, because the Z359 committee already plans to append at least three sections to it.

Fall Protection Rescue

THE updated standard for fall protection, ANSI Z359, will contain two important guidelines for rescue. A portion designated Z359.0 will provide facility managers a plan to build and maintain rescue operations, while Z359.3 is a new standard dedicated to the construction, use, and training required for fall protection rescue equipment.

Horizontal Lifelines: Don't Leave Them Hanging

IT is a beautiful sunny day in the Midwest, and a construction crew is setting the decking on bridge girders located over an interstate highway. Their horizontal lifeline (HLL) system is attached to each girder with a steel cable height of approximately 42 inches (waist height) and 2-inch squared steel posts supporting the steel cable system.

Who's Buying the Brands?

WITH 12 seconds left in the fourth quarter, the Washington Redskins lead the Dallas Cowboys by four points. John, a 34-year-old construction worker, holds his breath as Cowboys quarterback Quincy Carter steps back and throws a deep pass to the end zone.

Enforcing PPE Use

YOU've conducted a hazard assessment, identified personal protective equipment requirements, and trained your employees, but they don't always wear their PPE. Sooner or later, their failure to use PPE will lead to an injury.

Keep These Glove Selection Issues in Mind

SAFETY is a key concern for many companies, and so many businesses make substantial investments in various forms of protective apparel and equipment for the eyes, head, hands, arms, and feet. This article will focus on the factors to consider when selecting hand protection for a particular task.

Which Respirators Best Fit Your Emergency Escape Plans?

DETERMINING which respirators best fit your emergency escape plans may be one of the most critical steps you can take to ensure employees have the best chance for escape from a terrorist situation, natural disaster, or industrial accident.

Will My Safety Harness Save My Life?

THREE hundred feet in the air, stepping from girder to girder, the last thing I want running through my head is a question regarding the safety equipment I am using. Will the fundamental design of that equipment in fact save my life, or will it actually take it from me? Will I be home watching the ballgame with my family tonight, or will they be preparing for my funeral?



Let's Clear the Air on Respiratory Protection

HOW should you go about establishing or revising a respiratory protection program for a small or medium-size business? Many managers and newly appointed safety administrators who call us looking for advice seem overwhelmed at the prospect of wading through reams of government documents and possibly misinterpreting the regulations or selecting the wrong equipment.

Effective Use of PPE

EACH year, thousands of people in the United States are blinded from work-related eye injuries that proper use of eye and face protection could prevent, OSHA says.

Keep Your Eye on the Individual's Visual Function, Part 1

PREVENTION of work-related health complaints should be a top priority for occupational health professionals. Diagnosis and treatment of workers presenting with work-related problems represents an opportunity to prevent recurrences in those workers (tertiary prevention), to mitigate the effects of current work-related hazards in order to reduce the duration of the problem (secondary prevention), and to prevent the same problems in co-workers and those in similar jobs (primary prevention).

Envision an Injury-Free Workforce

SHOWERS of falling ash and cinders blow onto TV crews reporting a fire. The next day, an arson investigator digs in the charred remains of that fire. A crime scene investigator takes blood samples and fingerprints for analysis from a brutal murder, while demolition crews work amid clouds of dust, concrete, and metal particles.

Standards and Trends in the Glove Industry

REQUESTS are increasing from safety professionals for technical information on every type of glove made. As an R&D professional for a major glove manufacturer, I find these questions are becoming more commonplace.

Good Foot Protection Revolves Around Common Sense

A good workplace safety policy begins and ends with the employee. It makes sense for the employer to establish a solid safety policy, but it is always up to the employees to adhere to the regulations before they come into work for their shifts. It's not a question of comfort or convenience--it's literally a matter of life and limb.

Hand Protection for Electrical Safety

IN the realm of personal protective equipment, protective gloves offer the first line of defense against an array of hazards. Most often, they are used to protect the hands against scrapes, cuts, chemical, biological, and electrical hazards--with the goal of avoiding or limiting damage to the fingers, hands, wrists, and lower arms. In some instances, the correct hand protection also helps to guard against death.

Fall Safety for the Ironworker

SOME years ago, I built a harness for an ironworker who had an 80-inch waist and 54-inch thighs. He was bigger around than he was tall. I asked the Safety Director if a person this size should even be 6 feet off the ground.

Personal Fall Limiters

PROVIDING flood control, navigation, and electric power to 8.3 million people throughout the southeastern United States requires the 13,000 employees at the Tennessee Valley Authority--the nation's largest public power company--to work at low to moderate heights.

Creating a Cut-Free Workplace

AN obvious risk comes with working in any industry that involves handling sharp objects: From glass manufacturing to sheet metal fabrication, construction to warehousing, assembly to repair, cuts and lacerations are bound to occur. It comes with the job, or so it seems. But to safety professionals, that thought is counter-intuitive; all injuries can be prevented.

Principles of Physiology and Respirator Performance

EMERGENCY response workers frequently are required to wear respiratory protection to prevent the inhalation of toxic air contaminants. However, it is known there is a wide range of tolerance to the stresses of work among the working population. An individual's size, age, and fitness are among the conditions that influence the performance of his cardiorespiratory system and ability to perform the heavy work often required in emergency response.

Gloves That Last

YOU probably know how important it is to protect your employees' hands with the proper glove. But do you ever stop to think about how you can protect the glove itself? Doing so could save your employees from injury, and it could save you money, as well.

Product Showcase

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence

Webinars