Top Stories


OSHA Cites Company for Exposing Workers to Silica Dust

The agency has cited Grede Wisconsin Subsidiaries LLC for one repeat violation involving silica exposures.

PG&E Criminally Charged in San Bruno Pipeline Explosion

More than two years after NTSB concluded its inadequate quality assurance and quality control in 1956 during a pipeline relocation project caused the explosion, the utility faces 12 charges with potential penalties of $500,000 per charge.

London Fire Brigade: Most High-Rise Residents Lack Fire Plan

The brigade's survey found 60 percent of all high-rise residents -– approximately 760,000 households -– do not have a fire escape plan.



VA's Disability Claims Backlog Drops Sharply

The number of pending disability compensation claims peaked at more than 611,000 in March 2013, but the Department of Veterans Affairs has chopped it approximately 44 percent to 344,000 claims.

This image comes from a video posted to DEUS Rescue

Incorporating Rescue Into a Fall Protection Plan

Standards should be the basis for any employer's fall protection and rescue program.

The welding arc creates extreme temperatures and may pose a significant fire and explosion hazard if safe practices are not followed. (The Lincoln Electric Company photo)

Be Prepared: Five Potential Welding Safety Hazards to Avoid

The welding arc creates extreme temperatures and may pose a significant fire and explosion hazard if safe practices are not followed.

The purchasing manager tells me that since evaluating PPE selection beyond the mere paper value, they

Make No Haste in PPE Selection for Waste Workers

Not considering the whole picture (which includes comfort and adoption) results in a lack of compliance and, therefore, increased injuries.

All new vehicles under 10,000 pounds will be required by the NHTSA final rule to be equipped with rear-view technology as of 2018.

NHTSA Final Rule Requires Rear Visibility Technology

It applies to all new vehicles under 10,000 pounds by May 2018.

Congress, DOT Inspector General Eying Huge GM Recalls

General Motors CEO Mary Barra and David Friedman, acting NHTSA administrator, are scheduled to testify about the massive recalls April 1 at a House oversight subcommittee hearing.

Improved manufacturing processes have provided designers with the means to design a TPR exoskeleton that safeguards the user’s metacarpals and knuckles all the way to the tip of each finger without hindering mobility. (Mechanix Wear photo)

High Risk on the Rig

The primary objective is to eliminate hand exposure to pinch points, crush zones, and impact hazards.

MSHA Releases February Inspection Results

The agency's data show its inspectors issued 210 citations, eight orders, and one safeguard.

We constantly fight non-approved shoes in the workplace.

Walking the Walk on Occupational Foot Protection

Make decisions that work. If you have an area with a slick floor, look at a range of solutions and whether additional problems will be created by solving one.

Airborne pathogens are highly contagious.

Keeping Pathogens Out of the Workplace

Airborne pathogens are not only highly contagious, but also they can put a workforce completely out for weeks at a time.

FDA Orders Shutdown of Seafood Company

The agency ordered a smoked seafood manufacturer to cease its operations due to the presence of Listeria.

HHS to Announce Updated Plan on Viral Hepatitis

HHS officials including Assistant Secretary for Health Howard Koh, M.D., MPH, will participate in a launch event April 3 for the 2014-2016 update of the agency's Action Plan for the Prevention, Care and Treatment of Viral Hepatitis.

Product Showcase

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence