Top Stories


The study showed that the more actively a location participated in recognizing performance-based criteria (by distributing points for achieving specific metrics and best practices), the better they achieved in outcome-based criteria, which measured overall compliance with Standard Operating Procedures and also as compared to overall review of safety logbooks.

Safety Incentive Programs Work

The active use of the program by successful teams suggests that acknowledgement is critical to the success of these programs.

All employers, employees, and contractors within all three segments of the oil and gas industry (upstream, midstream, and downstream) are responsible for ensuring safe and healthful work sites.

Keeping Oil and Gas Workers Safe and Avoiding Costly Penalties

Exposures to hazards present in the oil and gas well drilling, servicing, and storage industry are addressed in specific standards for general industry.

​3M Seeking All Scholarship Winners

The company's not in touch with many of the past winners of its annual scholarships and wants to hear from all of them in time for 2016's 30th year of the scholarship program.



Medical Director Discusses 10 Ways to Leverage EH&S Collaboration at AIHce

Peter Greany of Work Care, Inc. gave his top ten list of ways to leverage collaboration with occupational health professionals.

NTSB Asks Pilots to 'See and Be Seen' in the Air

The agency issued a safety alert reminding pilots to look out for other aircraft and to make their presence known.

NHTSA Urges 15-Passenger Van Users to Check Tires

The NHTSA says tire safety is especially important for 15-passenger van users.

DOL and FAR Council Propose Guidance, Rule to Implement Fair Pay Order

A 60-day public comment period will follow publication.

Machine Guards May Have Prevented Arm Amputation

Griffin Lumber & Hardware received a willful violation from OSHA, which said the company ignored hazards.

OSHA and Health Canada plan to come up with a common label and SDS to help stakeholders comply with their Hazard Communication standards.

OSHA Working with Health Canada on GHS Alignment

The agencies plan to implement a system allowing the use of one label and one safety data sheet that would be acceptable in both countries.

OSHA Cites Contractor in Demolition Fatality

OSHA has cited Formica Construction Co. Inc. of Port Richmond, N.Y., for three willful, three serious, and one other-than-serious violation of OSHA standards with proposed fines of $121,000.

NSC Reports Traffic Deaths Have Increased for Six Consecutive Months

The trend is expected to continue as summer arrives.

Maryland State Police Made 9,500 Memorial Day Stops

Troopers' traffic enforcement efforts during the four-day Memorial Day weekend resulted in more than 9,500 vehicles stopped, with approximately 6,843 traffic citations and approximately 4,764 warnings issued.

Boeing forecasts global demand for commercial airline pilots to top 700,000 during the next 20 years. Airbus

FAA Announces Pilot Fitness Study

A joint FAA and industry group called the Commercial Aviation Safety Team recommended the study based on two recent major losses, the disappearance on March 8, 2014, of Malaysia Airlines Flight MH370 and the apparently deliberate crashing of Germanwings Flight 9525 in the French Alps by its co-pilot on March 24, 2015.

Firm Cited After Workers Endangered by Carbon Monoxide Gas: OSHA

OSHA has cited JRI Holdings Inc. for multiple violations.

Alfa Laval Faces $477,900 in Fines for Safety Violations

OSHA found 50 violations at the Broken Arrow, Okla., facility.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence

Webinars