Top Stories


Aug. 11, 2015 marked one full year since the last reported wild polio case in Africa, WHO announced.

WHO: No New Polio Cases in Africa for a Full Year

The continent appears to be on its way to becoming polio-free, according to the UN agency.

Michaels and OSHA Blast Illinois Construction Firm, Manager

"Kehrer Brothers Construction brought non-English-speaking workers to the U.S. and knowingly exposed them to asbestos," said Assistant Secretary Dr. David Michaels. "Kehrer also threatened to fire his employees if they spoke with our investigators. This is outrageous, illegal behavior. We at OSHA will do everything in our power to ensure this employer stops endangering his employees."

Steel Provider Repeatedly Exposes Workers to Fall and Chemical Hazards: OSHA

OSHA has cited Republic Steel for three repeat and eight serious violations.



Industrial Hygienists Sought for Board on Toxic Substances

Secretary of Labor Thomas Perez seeks nominees for service on an advisory board for the program that aids nuclear industry workers diagnosed with medical conditions as a result.

EASA Seeks Comments on European Drone Regulations

The EU agency is trying to find a method for controlling drones' risk to commercial aviation, privacy rights, and even general aviation.

New York City has ordered building owners with cooling towers to submit long-range plans for ensuring they are not contaminated with the legionella bacterium.

AIHA Releases New Legionella Guideline

The association announced it Aug. 10, the same day the New York City Department of Health and Mental Hygiene reported the outbreak in the Bronx has been contained.

NTSB Hails UPS Move on Collision Avoidance Technology

More than 2,600 new class 8 tractors the company is buying this year will be equipped with CAS, which NTSB has trumpeted as an important safety advancement.

Hazardous Location Ratings: Breaking Down the Facts

Sometimes electrical equipment must be installed in areas where combustible vapors and gases are used or may be present. These are commonly referred to as "hazardous locations" and are defined by the National Electrical Code (NEC) in the United States.

Australian Transport Safety Bureau Issues E-Cigarette Warning

"The passenger said that the safety switch on the e-cigarette was off. If the timing was even a little different, it could have resulted in a fire on board the aircraft during flight," according to the agency.

This NASA photo shows "Outredgeous" red romaine lettuce from the Veggie plant growth system on the International Space Station, which astronauts will sample for the first time Aug. 10, 2015.

ISS Crew Tasting Homegrown Greens Today

NASA announced they will eat half of a crop of "Outredgeous" red romaine lettuce that was grown in the Veggie plant growth system on the International Space Station.

Improving Heavy Equipment Safety and Efficiency with LEDs

Although most heavy equipment manufactured for industrial applications today is of exceptional quality and design, there are still common problems that arise due to the environments and situations in which it is operated. Most heavy equipment comes factory equipped with only the basic accessories and is primarily outfitted for operation in optimal conditions.

Proposed Standard Intends to Lower Beryllium Exposures

The OSHA proposal has support from Materion, the nation's primary beryllium product manufacturer.

The OSHA document recommends complying with the ANSI standard, Z358.1-2014, which says plumbed systems should be activated weekly, to eliminate these hazards.

OSHA Warns of Contaminated Eyewash Water

A recent OSHA Infosheet highlights the risk of eye infections from contaminated water in improperly maintained emergency equipment.

London Brigade's Report Lists Most Dangerous Hour for Fires

That hour is 7 p.m. during July. The hour with the fewest fires is 6 a.m., according to its “Fire Facts 1966-2014” report.

Safe Rescue Demonstrations Featured Daily in A+A's Hall 6

Rescue demonstrations will take place in Hall 6 each day of the trade fair. The focus will be on the occupational safety of the rescuers and on appropriate personal protection equipment, including fall protection gear.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars