Top Stories


Once a fabric has been manufactured, it should be inspected and tested for quality assurance and to ensure that the fabric meets or exceeds the ASTM and NFPA standards for flame resistance. (Mount Vernon FR photo)

Vertical Manufacturing of Flame-Resistant Cotton and Cotton-Rich Fabrics

Wear trials can help guide you in selecting the right fabric by providing a more comprehensive evaluation of important factors such as performance, comfort, and applicability.

"This worker literally came close to an early grave because the cemetery failed to provide proper excavation protections," said Anthony Ciuffo, OSHA

Grave Matter: OSHA Fines NY Cemetery Company for Cave-In

The agency cited St. John Cemetery Corp. for five violations, two classified as willful, after a worker was partially engulfed in May 2015 while in a grave opening.

Alabama Board Weighs Arc Fault Circuit Interrupter Measure

Indiana is the only other state that has amended AFCIs out of its building code, but a similar measure is currently pending in North Carolina, Jeffrey Sargent reported in the November/December NFPA Journal.



Florida Sets Record: A Decade with No Hurricanes

The most recent hurricane to make landfall in Florida was Wilma on Oct. 24, 2005, and it was also the last major hurricane to make landfall in the United States, according to weather.com.

Shell Oil Products Fined for Anacortes Refinery Release

L&I assessed one willful violation and the maximum $70,000 fine for knowingly and intentionally not following safe work practices for the control of hazards when shutting down the flare, as well as a serious violation and $7,000 fine for giving workers the incorrect procedure for shutting down the flare.

Atlanta Construction Company Exposed Workers to Dangerous Falls, OSHA Finds

The citations were issued for fall protection violations and failing to provide protective eyewear to workers using a pneumatic nail gun.

OSHA: Press Operator Loses Three Fingers at Metal Stamping Plant

Ohio Gasket & Shim Company, an Akron, Ohio, metal stamping company, has been cited for one willful violation and 12 serious safety violations.

California Company Recalls Celery Products

They are linked to an E. coli outbreak at Costco but are an ingredient in several companies' products, according to FDA.

Traffic Deaths Up Significantly This Year

NHTSA will hold a series of cross-cutting regional meetings across the country early next year to gather ideas, engage new partners, and generate additional approaches to combat human behavioral issues that contribute to road deaths.

Public safety is one of the areas where the most advances in "smart fabrics" are taking place, the U.S. Department of Commerce said as it announced the April 2016 Smart Fabrics Summit.

Smart Fabrics Summit Scheduled for April 2016

The Department of Commerce reports that the smart fabric product development is being seen in the fields of defense, fitness, health, and public safety.

NIST Releases Community Resilience Guide

Stephen A. Cauffman, manager of the NIST Community Resilience Program, reports that the Community Resilience Planning Guide sets out a collaborative six-step process that towns, cities, counties, and campuses can follow to better manage their hazard risks and build resilience.

WHO Launches Sexual Violence Toolkit

"WHO strongly condemns violence against women and girls and supports partners and countries' efforts towards the denormalization of this type of violence. Ensuring equality between women and men is a crucial part of these efforts," said WHO Director-General Dr. Margaret Chan.

NACOSH Emergency Response and Preparedness Subcommittee Meeting Set

The subcommittee will discuss elements of an emergency response and preparedness rule, including facility and equipment preparedness, vehicle preparedness and operation, pre-incident planning, and more at the Dec. 8 meeting.

Researchers Raise Toxicity Questions About 3D Printed Parts

Parts from two main classes of commercial 3D printers were found to be toxic to zebrafish embryos.

American Red Cross Offers Holiday Travel Tips

ARC suggests that people traveling for the Thanksgiving holiday, as millions of Americans are doing today, start by downloading the Red Cross First Aid App, which provides expert advice on what to do in case of an emergency.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars