Top Stories


Train all workers about the hazards and about maintaining clearance from overhead power lines.

Understand the Dangers of Electrical Shock

Electricity is one of the most common causes of fires and thermal burns in homes and workplaces.

The amount of exposure to individuals can depend upon work practices, ventilation, and location.

Welding Safety and Health Considerations

The amount of exposure to individuals can depend upon work practices, ventilation, and location. Will the work be done in wide open areas, inside a building adjacent to other work processes and people, or potentially even in a confined space?

Like bloodborne pathogens, hazardous chemicals can be present throughout a health care facility. Although it takes time to check each department, room, and closet, it really is one of the most effective ways to find materials that may otherwise be missed.

Health Care Hazmats: There's More On Site Than Just Bloodborne Pathogens

Sanitizing, disinfecting, and cleaning chemicals are likely to be found throughout the facility. It is important to know the particular brands and styles that are being used to verify that proper precautions are being taken.



Once a fabric has been manufactured, it should be inspected and tested for quality assurance and to ensure that the fabric meets or exceeds the ASTM and NFPA standards for flame resistance. (Mount Vernon FR photo)

Vertical Manufacturing of Flame-Resistant Cotton and Cotton-Rich Fabrics

Wear trials can help guide you in selecting the right fabric by providing a more comprehensive evaluation of important factors such as performance, comfort, and applicability.

"This worker literally came close to an early grave because the cemetery failed to provide proper excavation protections," said Anthony Ciuffo, OSHA

Grave Matter: OSHA Fines NY Cemetery Company for Cave-In

The agency cited St. John Cemetery Corp. for five violations, two classified as willful, after a worker was partially engulfed in May 2015 while in a grave opening.

Alabama Board Weighs Arc Fault Circuit Interrupter Measure

Indiana is the only other state that has amended AFCIs out of its building code, but a similar measure is currently pending in North Carolina, Jeffrey Sargent reported in the November/December NFPA Journal.

Florida Sets Record: A Decade with No Hurricanes

The most recent hurricane to make landfall in Florida was Wilma on Oct. 24, 2005, and it was also the last major hurricane to make landfall in the United States, according to weather.com.

Shell Oil Products Fined for Anacortes Refinery Release

L&I assessed one willful violation and the maximum $70,000 fine for knowingly and intentionally not following safe work practices for the control of hazards when shutting down the flare, as well as a serious violation and $7,000 fine for giving workers the incorrect procedure for shutting down the flare.

Atlanta Construction Company Exposed Workers to Dangerous Falls, OSHA Finds

The citations were issued for fall protection violations and failing to provide protective eyewear to workers using a pneumatic nail gun.

OSHA: Press Operator Loses Three Fingers at Metal Stamping Plant

Ohio Gasket & Shim Company, an Akron, Ohio, metal stamping company, has been cited for one willful violation and 12 serious safety violations.

California Company Recalls Celery Products

They are linked to an E. coli outbreak at Costco but are an ingredient in several companies' products, according to FDA.

Traffic Deaths Up Significantly This Year

NHTSA will hold a series of cross-cutting regional meetings across the country early next year to gather ideas, engage new partners, and generate additional approaches to combat human behavioral issues that contribute to road deaths.

Public safety is one of the areas where the most advances in "smart fabrics" are taking place, the U.S. Department of Commerce said as it announced the April 2016 Smart Fabrics Summit.

Smart Fabrics Summit Scheduled for April 2016

The Department of Commerce reports that the smart fabric product development is being seen in the fields of defense, fitness, health, and public safety.

NIST Releases Community Resilience Guide

Stephen A. Cauffman, manager of the NIST Community Resilience Program, reports that the Community Resilience Planning Guide sets out a collaborative six-step process that towns, cities, counties, and campuses can follow to better manage their hazard risks and build resilience.

WHO Launches Sexual Violence Toolkit

"WHO strongly condemns violence against women and girls and supports partners and countries' efforts towards the denormalization of this type of violence. Ensuring equality between women and men is a crucial part of these efforts," said WHO Director-General Dr. Margaret Chan.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence

Webinars