Top Stories


$13 Million Awarded to Provide Training for At-Risk Youths in El Salvador, Honduras

Catholic Relief Services will implement a project to develop skills for youths in those countries.

Airbus officials participating in the opening ceremony were (from left to right): Airbus Group, Inc. Chairman and CEO Allan McArtor, Airbus Group CEO Tom Enders, and Airbus President and CEO Fabrice Brégier.

Airbus Christens First U.S. Manufacturing Plant

At full production, the new Mobile, Ala., plant will be capable of producing 40-50 aircraft per year. Airbus also operates assembly lines in Toulouse, France; Hamburg, Germany; and Tianjin, China.

Joint Commission Launches Speak Up™ on Antibiotics Campaign

An estimated 2 million people in the United States each year are infected with bacteria that antibiotics cannot treat because the bacteria no longer respond to antibiotics.



Automakers to Include Automatic Emergency Braking on All New Vehicles

The Department of Transportation and IIHS announced 10 automakers are committing to the safety feature.

$42 Million Available for Connected Vehicle Technologies

New York City, Tampa, and Wyoming have been selected for pilot programs.

FR Garment Comfort: Explaining the Mystery

When it comes to selecting flame-resistant (FR) garments, there are many variables to consider, including protection, comfort, durability, appearance, style, cost, and quality.

Turning Down the Heat: Saving Money and Lives with the Right PPE Program

Workplace fires inflict major financial damages on companies and immeasurable impacts on burn victims and their families. Considering the total cost of a fire—in strict monetary terms, as well as in human suffering—all companies would do well to define and administer an effective employee safety program. Thoughtful, informed selection of protective garments should be a centerpiece of any such program.

A supermoon, the full moon when Earth

Lighting Up NSC 2015: Supermoon Eclipse

The Sept. 27 total eclipse of a perigee full moon will be the first time this has happened since 1982, according to NASA.

The University of California System Improves Lab Safety by Using DuPont Nomex

On a December afternoon in 2008, within the research laboratories of the University of California (UC) in Los Angeles, a routine procedure went terribly wrong.

NIOSH Planning Safety Survey of O&G Extraction Workers

Workers who drive as a part of their work duties will be asked to complete an additional set of questions about their driving environment and behaviors.

DARPA Testing Robotic Helicopter Landing Gear

"Having the ability to land on and take off from angled, irregular, and moving surfaces would greatly expand the effectiveness of helicopters across many military and national security missions," according to DARPA.

NIST Forming New Community Resilience Panel

Its formation is part of the institute's effort to reduce the damage natural, technological, and human-caused hazards inflict on U.S. communities.

Fire Emergency Declared in Two California Counties

With the Valley Fire quickly growing to 40,000 acres Sunday and mandatory evacuations under way, Gov. Brown declared a state of emergency in Lake and Napa counties.

Safety and Reliability in High Mast, Light Tower and Area Lighting

When illuminating a work area, sporting complex, roadway, or any populated area, safety and reliability are of the utmost importance. Without proper illumination, risk for accidents and injury is increased. Power outages, mechanical or equipment failure, or acts of nature can introduce unwanted hazards into the environment. Advances in LED technology have solutions that address these safety issues.

>"Hazmat special permits keep commerce moving while ensuring compliance with critical transportation safety requirements," said U.S. Transportation Secretary Anthony Foxx. "This rule makes the process for reviewing and approving these special permits easier and more efficient."

PHMSA Clarifies Hazmat Special Permits Process

The new procedures will shorten application processing times, the agency promises.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence

Webinars